Unit of competency Outline

Date retreived
22/07/2026 6:38 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out oxyacetylene thermal heating and cutting on vehicle body sections

Carry out oxyacetylene thermal heating and cutting on vehicle body sections

Unit of competency
National Code
AURVTW007
State Code
AWY96
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030711 - Boilermaking And Welding
Original Release Date
13/07/2016
Nominal Hours
15
Description
This unit describes the performance outcomes required to set up an oxyacetylene plant, follow safety requirements, adjust gauges to recommended working pressures, and conduct thermal heating and cutting. It involves preparing for the task, identifying and adjusting flame appropriate to thermal heating and cutting requirements, selecting and using suitable personal protective equipment (PPE), performing oxyacetylene thermal heating and cutting to given instructions, and completing workplace processes and documentation.It applies to those working in the automotive service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for the job
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Equipment manufacturer operating procedures and workplace procedures are accessed and interpreted
  • 1.3 Materials for oxyacetylene thermal heating and cutting are selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment and PPE are selected and checked for serviceability
  • 1.6 Work is planned to minimise waste and use time efficiently
2. Conduct thermal heating and cutting activities
  • 2.1 Work area is prepared according to workplace instructions and workplace procedures
  • 2.2 Oxyacetylene equipment is set up, gauges and pressures are set, and flames are adjusted according to equipment manufacturer operating procedures and workplace procedures
  • 2.3 Metal temperatures are monitored using a range of methods
  • 2.4 Thermal heating and cutting are carried out according to safety and environmental requirements and without causing damage to vehicle or components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, maintained and reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF580 AURVTW2007 Conduct oxy-acetylene, thermal heating and cutting Unit of competency