Unit of competency Outline

Date retreived
22/07/2026 8:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair laminated glass windscreens

Repair laminated glass windscreens

Unit of competency
National Code
AURVTG001
State Code
AXA08
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
040323 - Glazing
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to repair chipped or cracked laminated glass windscreens. It involves preparing for the task, selecting and using specialist tools and equipment, cleaning and removing moisture from chipped or cracked laminated glass windscreens, injecting resin into chip or crack, finishing repair work to industry standard, and completing workplace processes and documentation. It applies to those working in the automotive glazing service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to repair laminated glass windscreen
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Size of chip or crack is identified and checked against industry repair standards to determine compliance requirements
  • 1.3 Repair method is interpreted from glass repair system specifications and materials are checked for quality
  • 1.4 Work is planned to minimise waste and use time efficiently
  • 1.5 Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
  • 1.6 Required glass repair chemicals and their safety data sheets (SDS) are sourced and interpreted
  • 1.7 Hazards associated with the work are identified and risks are managed
  • 1.8 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.9 Vehicle is protected and safely located according to workplace procedures
2. Repair chipped and cracked laminated glass
  • 2.1 Repair process for chipped or cracked glass is followed according to glass repair system specifications, workplace procedures, industry standards, and safety and environmental requirements
  • 2.2 Glass surface is finished according to glass repair system specifications and SDS
  • 2.3 Repair is completed without causing damage to vehicle or components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF470 AURVTG2001 Repair laminated glass Unit of competency
Replaced By
State Code National Code Title Type
OCK00 AURVTG101 Repair laminated glass windscreens Unit of competency