Unit of competency Outline

Date retreived
22/07/2026 8:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove paint from vehicle painted surfaces

Remove paint from vehicle painted surfaces

Unit of competency
National Code
AURVTP001
State Code
AWZ55
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030507 - Automotive Vehicle Refinishing
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove paint from vehicle painted surfaces using a variety of industry-approved methods and without causing damage to vehicle and components. It involves preparing for the task, selecting and using specialist tools, equipment and chemicals to remove paint from metal and plastic component surfaces in preparation for repairs or refinishing, and completing workplace processes and documentation.It applies to those working in the automotive paint refinishing repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove paint from vehicle surface
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Paint removal information is located and interpreted
  • 1.3 Paint removal materials are selected and checked for quality
  • 1.4 Paint removal tools and equipment and personal protective equipment (PPE) are selected and checked for serviceability
  • 1.5 Paint removal methods are identified and their effect on components determined according to workplace procedures and customer requirements
  • 1.6 Hazards associated with the work are identified and risks are managed
  • 1.7 Work is planned to minimise waste and damage to vehicle
2. Remove paint
  • 2.1 Vehicle metal and plastic components requiring paint removal are identified and prepared
  • 2.2 Vehicle paint is removed according to workplace and paint manufacturer recommended procedures, and safety and environmental requirements
  • 2.3 Paint removal activities are completed without causing damage to vehicle or component surfaces
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and vehicle panel or component is presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF520 AURVTP2001 Apply paint removal methods Unit of competency
Replaced By
State Code National Code Title Type
OCL83 AURVTP101 Remove paint from vehicle painted surfaces Unit of competency