Unit of competency Outline

Date retreived
22/07/2026 6:21 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and replace automotive and marine interior trim components

Remove and replace automotive and marine interior trim components

Unit of competency
National Code
AURVTT003
State Code
AWZ16
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030513 - Upholstery And Vehicle Trimming
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to safely remove and replace interior trim in an automotive or marine application. It involves preparing for the task, selecting and using tools and equipment, removing and replacing interior components, conducting a final inspection of work, and completing workplace processes and documentation. It applies to those working in the automotive and marine trimming industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and replace interior trim component
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Original equipment manufacturer (OEM) specifications and workplace procedures are accessed and interpreted
  • 1.3 Interior trim component to be removed and replaced is identified and inspected for damage
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.6 Work is planned to minimise waste and use time efficiently
2. Remove, store and replace trim
  • 2.1 Trim component is removed according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
  • 2.2 Trim component is safely stored in preparation for replacement
  • 2.3 Trim component is replaced according to OEM specifications, workplace procedures, and safety and environmental requirements, and without causing damage to vehicle or other components
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and component is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF555 AURVTT2003 Remove and replace vehicle interior trim components Unit of competency