Unit of competency Outline

Date retreived
22/07/2026 10:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and tag vehicle body components

Remove and tag vehicle body components

Unit of competency
National Code
AURVTN001
State Code
AWZ94
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
22
Description
This unit describes the performance outcomes required to identify and tag a range of vehicle body components. It involves preparing for the work, removing and tagging body components by title, job number and application, and completing workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation to entering the automotive body repair industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and tag vehicle body components
  • 1.1 Task instruction is interpreted and vehicle to be worked on is identified
  • 1.2 Body component information is sourced and interpreted
  • 1.3 Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • 1.4 Tools and equipment are selected and checked for serviceability
2. Remove components
  • 2.1 Body components for removal are identified
  • 2.2 Components are removed according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 2.3 Removed components are inspected and findings recorded according to workplace procedures
3. Tag components
  • 3.1 Tagging procedures are identified
  • 3.2 Removed components are legibly tagged without causing damage and according to workplace procedures
  • 3.3 Tagged components are stored according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets task instruction and workplace standards
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF484 AURVTN1001 Remove and tag vehicle body system components Unit of competency