Unit of competency Outline

Date retreived
23/07/2026 5:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Inspect and service line trimming systems and components

Inspect and service line trimming systems and components

Unit of competency
National Code
AURPTA006
State Code
AXB79
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
8
Description
This unit describes the performance outcomes required to inspect and service line trimming systems and components according to manufacturer instructions. It involves preparing for the task, inspecting the system and components, reporting the inspection findings, servicing and adjusting the system and components, and completing workplace processes and documentation.It applies to those working in the outdoor power equipment service and repair industry. The line trimming systems include brush cutters and grass trimmers which may be electric or petrol driven, stand-alone or fitted to other equipment systems.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect and service line trimming system of outdoor power equipment
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Manufacturer inspection and servicing procedures and information are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools, equipment and materials are selected and checked for serviceability
2. Inspect line trimming system
  • 2.1 Line trimming system is inspected and tested according to manufacturer specifications, workplace procedures and safety requirements
  • 2.2 Inspection results are compared with manufacturer specifications
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
  • 2.4 Authorisation to proceed is obtained according to workplace procedures
3. Service line trimming system
  • 3.1 Service options are selected according to manufacturer maintenance schedule and lubrication charts
  • 3.2 Service and adjustments are carried out according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 3.3 Post-service testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF298 AURPTA2006 Service line trimming systems and components Unit of competency
Replaced By
State Code National Code Title Type
OCL28 AURPTA106 Inspect and service line trimming systems and components Unit of competency