Unit of competency Outline

Date retreived
22/07/2026 8:16 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and tag bicycle components

Remove and tag bicycle components

Unit of competency
National Code
AURBTA001
State Code
AXE55
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
12
Description
This unit describes the performance outcomes required to identify and tag a range of bicycle components. It involves preparing for the work, removing and tagging bicycle components by title, job number and bicycle application, and completing workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation for entering the bicycle retail, service and repair industry.The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and tag bicycle components
  • 1.1 Task instruction is interpreted and bicycle to be worked on is identified
  • 1.2 Bicycle component information is sourced and interpreted
  • 1.3 Potential hazards and risks associated with task are identified and reported to workplace supervisor
  • 1.4 Tools and equipment are selected and checked according to workplace procedures
2. Remove components
  • 2.1 Bicycle components to be removed are identified
  • 2.2 Components are removed according to manufacturer specifications, workplace procedures, and safety and environmental requirements, and without causing damage to components or systems
  • 2.3 Removed components are inspected and findings recorded according to workplace procedures
3. Tag components
  • 3.1 Tagging procedures are identified
  • 3.2 Removed components are legibly tagged without causing damage and according to workplace procedures
  • 3.3 Tagged components are stored according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets task instruction and workplace standards. Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.2 Tools and equipment are checked and stored according to workplace procedures
  • 4.3 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF041 AURBTA1001 Remove and tag bicycle components Unit of competency