Unit of competency Outline

Date retreived
24/07/2026 5:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out minor adjustments to outdoor power equipment

Carry out minor adjustments to outdoor power equipment

Unit of competency
National Code
AURPTA002
State Code
AXB81
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to carry out minor adjustments to outdoor power equipment. It involves preparing for the task, inspecting and carrying out minor adjustments, and completing workplace processes and documentation.It applies to those working in the outdoor power equipment service and repair industry. The equipment includes lawn mowers, chainsaws, pumps, post hole borers, portable generators, stationary engines, brush cutters, leaf blowers or other outdoor power equipment.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to inspect and adjust outdoor power equipment
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Inspection and adjustment procedures and information are sourced and interpreted
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Tools and equipment are selected and checked for serviceability
2. Inspect outdoor power equipment
  • 2.1 Outdoor power equipment is inspected according to manufacturer specifications, workplace procedures, and safety requirements
  • 2.2 Inspection results are compared with manufacturer specifications
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary repairs or adjustments
  • 2.4 Authorisation to proceed is obtained according to workplace procedures
3. Carry out minor adjustments
  • 3.1 Adjusting tools and equipment are selected according to manufacturer specifications and workplace procedures
  • 3.2 Minor adjustments are carried out on outdoor power equipment according to manufacturer specifications, workplace procedures, and safety requirements, and without causing damage to components or systems
  • 3.3 Post-adjustment testing is carried out according to workplace procedures
4. Complete work processes
  • 4.1 Final inspection is made to ensure work is to workplace expectations and equipment is presented ready for use, including protective guards, cowlings and safety features
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF294 AURPTA1002 Perform minor adjustments to outdoor power equipment Unit of competency
Replaced By
State Code National Code Title Type
OCL80 AURPTA102 Carry out minor adjustments to outdoor power equipment Unit of competency