Unit of competency Outline

Date retreived
22/07/2026 3:19 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out minor adjustments to motorcycles

Carry out minor adjustments to motorcycles

Unit of competency
National Code
AURJTA001
State Code
AXD09
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030503 - Vehicle Mechanics
Original Release Date
13/07/2016
Nominal Hours
10
Description
This unit describes the performance outcomes required to carry out minor adjustments to motorcycle systems, components and equipment. It involves preparing for the work, inspecting the motorcycle and determining the work requirement, carrying out minor adjustments, and completing workplace processes and documentation.It applies to those undertaking a Vocational Education and Training in Schools (VETiS) or pre-vocational qualification as preparation for entering the automotive retail, service and repair industry. The unit is designed for use in a highly supervised context and is not suitable for use in a vocational qualification.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to carry out minor adjustments
  • 1.1 Task instructions are interpreted and motorcycle to be worked on is identified
  • 1.2 Motorcycle component information is sourced and interpreted
  • 1.3 Potential hazards and risks associated with the task are identified and reported to workplace supervisor
  • 1.4 Tools and equipment are selected and checked for serviceability
2. Inspect motorcycle and determine work requirement
  • 2.1 Inspection is carried out according to workplace procedures and safety requirements
  • 2.2 Inspection results are compared with manufacturer specifications
  • 2.3 Inspection findings are reported according to workplace procedures, including recommendations for necessary minor adjustments
3. Undertake minor adjustment activities
  • 3.1 Adjustment options are analysed and those most appropriate to the circumstances are selected
  • 3.2 Adjustments are carried out according to manufacturer specifications and workplace procedures, and without causing damage to components or systems
  • 3.3 Post-adjustment testing is carried out to ensure safe and correct operation of motorcycle
4. Complete work processes
  • 4.1 Final inspection is made to ensure work meets task instructions and workplace standards
  • 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 4.3 Tools and equipment are checked and stored according to workplace procedures
  • 4.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF174 AURJTA1001 Perform minor adjustments to motorcycles Unit of competency