Unit of competency Outline

Date retreived
23/07/2026 5:51 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply traditional foundations to upholstered furniture

Apply traditional foundations to upholstered furniture

Unit of competency
National Code
MSFUP3001
State Code
WI667
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030115 - Furniture Upholstery And Renovation
Original Release Date
19/06/2014
Nominal Hours
64
Description
This unit of competency covers applying traditional upholstery foundations to upholstered furniture.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan operation
  • 1.1 Work order or instructions are used to confirm type of traditional furniture foundations to be applied
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 Attaching methods are identified and fitting sequence is determined
  • 1.4 Suitable work area is selected and prepared
  • 1.5 Tools and hardware for the application of the foundation are selected and checked for safe operation
  • 1.6 Traditional foundation components are selected as required
2 Prepare and attach traditional foundation
  • 2.1 Mounting points are measured and marked on the frame, as required
  • 2.2 Traditional foundation is positioned and appropriate fasteners are used to secure it to the item
  • 2.3 Appropriate fasteners are used to secure the traditional foundation, as required
  • 2.4 The applied foundation is inspected for fit, finish and quality with those requiring reworking/refitting being tagged for further reprocessing or recycling/disposal in accordance with workplace practices
  • 2.5 Process is monitored and conditions which may affect quality standards are noted
  • 2.6 Variations to normal activities are reported in accordance workplace procedures
  • 2.7 Authorised changes in standard operating procedures and work order or instructions are implemented
3 Complete work
  • 3.1 Workplace documentation, including stock usage, is completed in accordance with workplace procedures
  • 3.2 Faulty and/or defective equipment is tagged and reported in accordance with workplace procedures
  • 3.3 Waste and scrap are removed in accordance with workplace procedures
  • 3.4 Tools and equipment used are cleaned, inspected for serviceable condition and stored appropriately in accordance with workplace procedures
  • 3.5 Equipment is maintained and work area is cleaned in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8811 LMFUP3001B Apply traditional foundations to upholstered furniture Unit of competency
Replaced By
State Code National Code Title Type
OEJ66 MSFUP3015 Apply traditional foundations to upholstered furniture Unit of competency