Perform hazardous action sequences involving fights and falls

Unit of competency Outline

Date retreived
23/07/2026 12:58 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
CUAHAZ402

State Code
AWI82

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
15/01/2016

View on TGA

State Implementation and Classification

Approved Date

21/07/2016

Field of Education

061301 - Occupational Health And Safety

Original Release Date

21/07/2016

Nominal Hours

Description

This unit describes the skills and knowledge required for safe execution of hazardous action sequences involving fights and falls during screen productions.It applies to recognised stunt actors and performers who work under strict guidance of stunt coordinators and fight directors. They are responsible for ensuring set-up, rehearsal, performance and review of hazardous action sequences comply with production requirements, as well as screen safety and industry codes of practice. They are also responsible for ensuring all aspects of action sequences they perform are done in a way that minimises risk to themselves and other cast and crew members.Industry-graded stunt performers require a broad range of licences, certificates and gradings. Check with the Media, Entertainment & Arts Alliance (MEAA) for other specific requirements.

Notes

Elements and Performance Criteria

1. Prepare for execution of hazardous action sequences

1.1 Notify relevant personnel on arrival at location, and confirm capacity to deliver hazardous action sequences involving fights and falls
1.2 Review skills requirements and own experience, and that of other specialist personnel, for relevance to proposed sequences
1.3 Note camera locations for coverage of hazardous action sequences
1.4 Evaluate hazardous action sequences to determine most appropriate physical warm-up activity
1.5 Note props, set and equipment to be used in hazardous action sequences and confirm their technical suitability with cast and crew
1.6 Note positioning and movement of all personnel involved in hazardous action sequences to facilitate visual continuity and editing
1.7 Consider alternative execution methods for hazardous action sequences
1.8 Confirm with relevant personnel that planned hazardous action sequences comply with legal and regulatory requirements

2. Attend personnel briefings

2.1 Review hazardous action sequence information
2.2 Confirm communication methods, chain of command, cues, and abort and emergency action procedures
2.3 Check technical specifications for production materials to be used and advise relevant personnel of issues that need addressing
2.4 Confirm hazardous action sequences are consistent with the style of production

3. Prepare production area

3.1 Unload, position and assemble production materials to be used in hazardous action sequences
3.2 Check all equipment and handling procedures comply with safety standards and regulatory requirements and notify relevant personnel of non-compliance issues
3.3 Review camera positions for latent safety issues
3.4 Prepare body to perform hazardous action sequences through warm-up activities
3.5 Check production areas are clear of unwanted objects and unnecessary personnel

4. Safety test hazardous action sequences

4.1 Identify and recall spot marks and other visual cues to assist in positioning during hazardous action sequences
4.2 Confirm all personal protective equipment (PPE) and other safety equipment is fitted and functioning correctly
4.3 Test hazardous action sequences through simulation or in rehearsals
4.4 Advise relevant personnel if testing identifies the need to revise planned hazardous action sequences
4.5 Abort hazardous action sequences where unacceptable risk emerges, and advise relevant personnel

5. Safely perform hazardous action sequences

5.1 Comply with relevant personal protective equipment (PPE) requirements
5.2 Check whether other high-risk activities are taking place in the same scenes
5.3 Check again that areas are clear of unwanted objects and personnel
5.4 Execute sequences according to agreed production schedules and cues
5.5 Follow all safety controls and regulatory requirements during execution of sequences
5.6 Implement alternative safeguards for all production personnel where variations to agreed plans occur
5.7 Abort hazardous action sequences where unacceptable risk arises, and advise relevant personnel
5.8 Check continuity of hazardous action sequences is maintained throughout execution

6. Respond to emergency situations

6.1 Abort activities and implement emergency plans in the event of accidents
6.2 Clear sites of all personnel and if possible, remove items that may cause further injury
6.3 Identify items or locations that may need to be isolated for safety and investigative activities
6.4 Advise relevant personnel of the emergency situation according to established procedures

7. Secure locations on completion of hazardous action sequences

7.1 Check inventory of, transport and store production materials used in execution of hazardous action sequences, in accordance with enterprise and regulatory requirements
7.2 Inspect locations to ensure they are left in a safe and secure state
7.3 Participate in post-sequence evaluations and provide feedback to guide future productions
7.4 Complete personal logbook and contribute to final written reports as required

No information

Replaces

State Code	National Code	Title	Type
D1132	CUFHAZ402A	Perform hazardous action sequences involving fights and falls	Unit of competency

Replaced By

State Code	National Code	Title	Type
ODG34	CUAHAZ405	Perform hazardous action sequences	Unit of competency