Unit of competency Outline

Date retreived
22/07/2026 3:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble a complex artwork package

Assemble a complex artwork package

Unit of competency
National Code
MSFPF3008
State Code
WI595
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
60
Description
This unit of competency covers identifying, gathering and assembling all picture frame components required to complete complex, custom framing of artwork.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for assembly
  • 1.1 Packages to be assembled are identified from work orders/instructions/customer requirements
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 Safe and suitable work areas are selected to assemble package
  • 1.4 Specifications of artwork to be framed are identified, including any special requirements with liabilities and obligations assessed
  • 1.5 Components, fittings and attachments required for the package, and their source, are identified
  • 1.6 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • 1.7 Work sequence is planned to suit the job
2 Assemble package
  • 2.1 Components of the package are selected, inspected for flaws/faults and, if located, repaired or returned in accordance with industry standards and workplace procedures
  • 2.2 Components are cleaned and laid out for assembly in accordance with workplace procedures
  • 2.3 Artwork is mounted using the appropriate method
  • 2.4 Frame components are assembled and adjusted, as required, to fit and fixed in place
  • 2.5 Frame is fitted over package and the backing is fixed in accordance with workplace procedures
  • 2.6 Fittings, attachments and hanging aids are attached in accordance with workplace procedures
  • 2.7 Package is inspected for quality and either labelled and stored or returned for re-assembly in accordance with workplace procedures
3 Complete work
  • 3.1 Work area is cleaned and rubbish disposed of as appropriate
  • 3.2 Workplace documentation is completed as required
  • 3.3 Tools, equipment and unused materials are cleaned and stored following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8736 LMFPF3008B Assemble artwork package (complex) Unit of competency
Replaced By
State Code National Code Title Type
OAI36 MSFPF3016 Assemble complex artwork packages Unit of competency
State Code National Code Title Type
J733 MSF30513 Certificate III in Picture Framing Qualification