Qualification Outline

Date retreived
22/07/2026 4:25 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate III in Picture Framing

Certificate III in Picture Framing

Qualification
National Code:
MSF30513
State Code:
J733
TGA Status:
Replaced
DTWD Status:
Replaced
National Endorsed, State Implementation and Classification
Field of Education
0301 - Manufacturing Engineering And Technology
Original TGA Release Date
10/12/2013
Approved Date
19/06/2014
Stream of Study
Initial Vocational (3100 - 3600)
VET Act Classifier
B
Nominal Hours
803
Duration
2 Semesters
Current Release Number
2.00
Current Release Date
04/03/2016
VET Act Conditions
—
Releases
Release Version Release Date TGA Status DTWD Status
2.00 04/03/2016 Current Approved
1.00 10/12/2013 Replaced Approved
Description

This qualification describes the skills and knowledge required to prepare design requirements for framing and use mouldings and mat to frame pictures, artwork, and textiles, including use of glass and glazing materials, where required.

There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.

Schedule
Packaging Rules
To be awarded the MSF30513 Certificate III in Picture Framing, competency must be achieved in twenty-one (21) units of competency.
- fourteen (14) core units of competency
- seven (7) elective units of competency, of which
- a minimum of four (4) units from Group A
- up to three (3) units from Group B
- up to three (3) relevant units may be chosen from units not already selected from Groups A and B, or units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 3 units) or Certificate IV level (maximum 1 unit).

Units selected from other Training Packages and accredited courses via Group B must be relevant to the qualification outcome and not duplicate units available within this qualification.
1. Core Units

All fourteen (14) units must be completed.

State Code National Code Title Hours Type
AWC20 MSMSUP102 Communicate in the workplace 26 Unit of competency
WI585 MSFPF2006 Cut and handle glazing materials for framing 24 Unit of competency
WI584 MSFPF2005 Cut mat boards 44 Unit of competency
WI581 MSFPF2002 Cut mouldings to length 28 Unit of competency
WI588 MSFPF3001 De-frame artwork 32 Unit of competency
WI582 MSFPF2003 Join mouldings 40 Unit of competency
WI512 MSFGN2001 Make measurements and calculations 20 Unit of competency
WI583 MSFPF2004 Mount artwork 52 Unit of competency
AWC13 MSMENV272 Participate in environmentally sustainable work practices 20 Unit of competency
WI593 MSFPF3006 Prepare design requirements for framing 48 Unit of competency
WI592 MSFPF3005 Recognise and handle artwork for framing 60 Unit of competency
WI580 MSFPF2001 Use picture framing sector hand and power tools 40 Unit of competency
AWC31 MSMSUP106 Work in a team 26 Unit of competency
AWC15 MSMWHS200 Work safely 26 Unit of competency
2. Group A

A minimum of four (4) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
WI594 MSFPF3007 Apply frame finishes 48 Unit of competency
WI586 MSFPF2007 Assemble a basic artwork package 40 Unit of competency
WI595 MSFPF3008 Assemble a complex artwork package 60 Unit of competency
WI589 MSFPF3002 Decorate mat boards 48 Unit of competency
WI596 MSFPF3009 Install artwork 25 Unit of competency
WI591 MSFPF3004 Prepare textiles for framing 60 Unit of competency
WI587 MSFPF2008 Recognise and repair finishes of framing materials 44 Unit of competency
WI590 MSFPF3003 Set up and operate computer numerically controlled (CNC) machines for picture framing work 60 Unit of competency
AUP31 ICPPRN384 Set up and produce basic digital print 50 Unit of competency
3. Group B

Up to three (3) units may be chosen from Group B.
Please refer to the packaging rules for the full details of available options.

State Code National Code Title Hours Type
AUJ89 BSBSMB305 Comply with regulatory, taxation and insurance requirements for the micro business 45 Unit of competency
AUM29 BSBCUS301 Deliver and monitor a service to customers 40 Unit of competency
AUJ88 BSBITU306 Design and produce business documents 60 Unit of competency
WI515 MSFGN3002 Estimate and cost job 16 Unit of competency
AUG99 BSBSMB303 Organise finances for the micro business 50 Unit of competency
AUJ68 BSBWOR301 Organise personal work priorities and development 30 Unit of competency
AUH95 BSBCUE304 Provide sales solutions to customers 40 Unit of competency
W8285 MSAPMSUP201A Receive or despatch goods 26 Unit of competency
Replaces
State Code National Code Title Type
W036 LMF30802 Certificate III in Picture Framing Qualification
Replaced By
State Code National Code Title Type
BED4 MSF30518 Certificate III in Picture Framing Qualification
VET Info Notes
MSF30513 is EQUIVALENT to LMF30802
Entry Requirements

Not applicable

Traineeships and Apprenticeships
(TR06050) PICTURE FRAMING (LEVEL 3) Traineeship