Unit of competency Outline

Date retreived
22/07/2026 5:31 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply frame finishes

Apply frame finishes

Unit of competency
National Code
MSFPF3007
State Code
WI594
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
48
Description
This unit of competency covers applying surface coatings to picture frames.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work to be completed is identified from work order/instruction
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 The process for obtaining materials/components and moving completed work to the next process is identified
  • 1.4 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the finishing task in terms of quality, serviceability and safety
  • 1.5 Appropriately ventilated area, including fume extraction system (if appropriate) is prepared for use
  • 1.6 Finishing materials are identified and prepared for the finishing task
  • 1.7 Workplace information relating to the safe application of finishes is used to inform work practices
  • 1.8 Processing and application techniques, time and safety requirements are identified and used to plan process
2 Prepare for finishing
  • 2.1 Frame surfaces are checked for contamination and correct preparation according to workplace procedures and standards
  • 2.2 Frames with surface or other faults are identified and faults reported or repaired, as appropriate
  • 2.3 Techniques for application of materials identified and used according to workplace practices
  • 2.4 Colour match and trial applications of finish are made to check equipment operation, materials consistency and required surface finish
  • 2.5 Faults are identified and workplace procedures for rectification are followed
3 Apply surface finish
  • 3.1 Surface finish is applied according to job instructions and workplace procedures
  • 3.2 Surface finish is checked in accordance with workplace requirements
  • 3.3 Rectification of surface faults is made as necessary
  • 3.4 Products are inspected and approved for suitability for further processing
  • 3.5 Defects are dealt with and/or reported in accordance with workplace procedures
4 Complete work
  • 4.1 Tools and equipment are cleaned and inspected for serviceable condition and stored appropriately
  • 4.2 Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed
  • 4.3 Work area is cleaned and returned to approved condition
  • 4.4 Workplace documentation is completed
No information
No information
Replaces
State Code National Code Title Type
W8735 LMFPF3007B Apply frame finishes Unit of competency
Replaced By
State Code National Code Title Type
OAI37 MSFPF3015 Apply frame finishes Unit of competency
State Code National Code Title Type
J733 MSF30513 Certificate III in Picture Framing Qualification