Unit of competency Outline

Date retreived
22/07/2026 7:52 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut mouldings to length

Cut mouldings to length

Unit of competency
National Code
MSFPF2002
State Code
WI581
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
28
Description
This unit of competency covers cutting frame mouldings to the required length with guillotines, saws or other equipment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Patterns, work instructions and/or plans are read and interpreted
  • 1.2 Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 The process for obtaining materials/components and moving completed work to the next process is identified
  • 1.4 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • 1.5 Cutting equipment components and controls, including emergency stops and guards, are identified
  • 1.6 Work sequence is planned to suit the job
2 Conduct cutting operation
  • 2.1 Equipment is operated and monitored to ensure correct cut quality, output and that wastage is within allowable limits
  • 2.2 Problems occurring during work operations are identified and reported to appropriate persons
  • 2.3 Authorised changes in working procedures are followed
  • 2.4 Routine lubrication and adjustments for the equipment are completed
  • 2.5 Items which do not meet quality requirements are repaired or discarded
  • 2.6 Finished work is inspected for compliance with work order, workplace requirements and finish
3 Complete work
  • 3.1 Scraps and off-cuts are removed for disposal/recycling as required by workplace procedures
  • 3.2 Work area is cleaned and rubbish disposed of as appropriate
  • 3.3 Workplace documentation is completed as required
  • 3.4 Tools, equipment and unused materials are cleaned and stored following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8722 LMFPF2002B Cut mouldings to length Unit of competency
Replaced By
State Code National Code Title Type
OAI47 MSFPF2009 Cut mouldings to length Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
J733 MSF30513 Certificate III in Picture Framing Qualification