Unit of competency Outline

Date retreived
23/07/2026 4:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Recognise and repair finishes of framing materials

Recognise and repair finishes of framing materials

Unit of competency
National Code
MSFPF2008
State Code
WI587
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
44
Description
This unit of competency covers recognising finishes and effecting repairs to damaged framing materials.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 The composition and finish of damaged framing materials is identified and viability/feasibility of effecting repair determined
  • 1.2 Repairs to be effected are identified from work/job instructions or as a result of inspection of framing materials
  • 1.3 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.4 Repair requirements and procedures are identified from drawings/specifications and workplace procedures
  • 1.5 Work sequence is planned to suit the job
  • 1.6 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
2 Repair framing materials
  • 2.1 Fillers and abrasive agents are used to remove/fill holes and other blemishes in materials
  • 2.2 Other defects are repaired in accordance with workplace procedures
  • 2.3 Colours are matched to suit existing finish of materials
  • 2.4 Finishes are applied to materials in accordance with workplace procedures
  • 2.5 Problems occurring during repairs are identified and reported to appropriate persons
  • 2.6 Repaired material is inspected to ensure best possible match to existing finish and either stored, returned for further repair or scrapped in accordance with workplace procedures
3 Complete work
  • 3.1 Work area is cleaned and rubbish disposed of as appropriate
  • 3.2 Workplace documentation is completed as required
  • 3.3 Tools, equipment and unused materials are cleaned and stored following workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8728 LMFPF2008B Recognise and repair finishes of framing materials Unit of competency
Replaced By
State Code National Code Title Type
OAI48 MSFPF2015 Repair framing material finishes Unit of competency
State Code National Code Title Type
J733 MSF30513 Certificate III in Picture Framing Qualification