Unit of competency Outline

Date retreived
22/07/2026 3:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Join mouldings

Join mouldings

Unit of competency
National Code
MSFPF2003
State Code
WI582
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers joining mouldings to form artwork frames.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Patterns, work instructions and/or plans are read and interpreted
  • 1.2 Work health safety (WHS) requirements relevant to the operation of joining mouldings, including personal protection needs, are observed throughout the work
  • 1.3 The process for obtaining materials/components and moving completed work to the next process is identified
  • 1.4 Required components, attachments, tools and equipment are identified
  • 1.5 Work sequence is planned to suit the job
2 Prepare for frame assembly
  • 2.1 Components of the frame are selected and checked against work instructions for size, number, pattern and finish profile
  • 2.2 Fixing and joining devices are selected in accordance with work instructions and type of moulding to be joined
  • 2.3 Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
  • 2.4 Shortages/defective items are notified in accordance with workplace practices
3 Assemble frame
  • 3.1 Components are laid out and joined using a jig (if required) and appropriate fastenings
  • 3.2 Assembled frame is checked for alignment, pattern matching (if appropriate), correct number and fitting of fasteners and other attachments and conformity to work instruction and quality requirements
  • 3.3 Corners are finished in accordance with workplace requirements
  • 3.4 Joined frames are stored according to workplace requirements
4 Complete work
  • 4.1 Completed frames are inspected for quality, with those not meeting specification being repaired or tagged for further processing or recycling/disposal
  • 4.2 Tools, equipment and unused materials are cleaned and stored following workplace procedures
  • 4.3 Equipment faults are identified, tagged and reported to appropriate personnel
  • 4.4 Work area is cleaned and rubbish disposed of as appropriate
  • 4.5 Workplace documentation is completed as required
No information
No information
Replaces
State Code National Code Title Type
W8723 LMFPF2003B Join mouldings Unit of competency
Replaced By
State Code National Code Title Type
OAI45 MSFPF2010 Join mouldings Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
J733 MSF30513 Certificate III in Picture Framing Qualification