Unit of competency Outline

Date retreived
22/07/2026 8:25 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use picture framing sector hand and power tools

Use picture framing sector hand and power tools

Unit of competency
National Code
MSFPF2001
State Code
WI580
TGA Status
Deleted
DTWD Status
Transition (Deleted)
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/06/2014
Nominal Hours
40
Description
This unit of competency covers using hand and power tools in applications relating to the picture framing sector of the furnishing industry in small, medium and large businesses.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify hand and power tools
  • 1.1 Types of hand and power tools and their functions are identified
  • 1.2 Sources of, and access to, power supply are recognised
  • 1.3 Work health and safety (WHS) requirements for using hand and power tools are recognised and implemented
2 Select and use appropriate hand tools
  • 2.1 Hand tools are selected consistent with needs of the job
  • 2.2 Hand tools are checked for serviceability and safety, and any faults reported to supervisor in accordance with enterprise procedures
  • 2.3 Equipment is selected to hold, position or support material for hand tools application, where applicable
  • 2.4 Material is located and held in position for hand tool application
  • 2.5 Hand tools are safely and effectively used according to their intended purpose
  • 2.6 Hand tools are safely located when not in immediate use
3 Select and use appropriate power tools
  • 3.1 Appropriate personal protective equipment is selected, correctly fitted and used
  • 3.2 Power tools are selected consistent with needs of job in accordance with conventional work practice
  • 3.3 Power tools are visually checked for serviceability and safety in accordance with WHS requirements, and any faults reported to supervisor in accordance with enterprise procedures
  • 3.4 Equipment is selected to hold, position or support materials for power tool application, where applicable
  • 3.5 Material is located and held in position for power tool application, where applicable
  • 3.6 Power tools are safely and effectively used in application processes
  • 3.7 Power tools are safely switched and located when not in use
4 Clean up work area and tools
  • 4.1 All tools are cleaned, maintained and stored
  • 4.2 Equipment is cleaned, maintained and stored
  • 4.3 Documentation is completed in accordance with enterprise procedures
  • 4.4 Work area is cleaned and waste removed
No information
No information
Replaces
State Code National Code Title Type
W8721 LMFPF2001B Use picture framing sector hand and power tools Unit of competency
State Code National Code Title Type
J725 MSF20113 Certificate II in Furnishing Qualification
J733 MSF30513 Certificate III in Picture Framing Qualification