Unit of competency Outline

Date retreived
22/07/2026 3:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply sheet laminates by hand

Apply sheet laminates by hand

Unit of competency
National Code
MSFFM2015
State Code
OEL23
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030113 - Cabinet Making
Original Release Date
19/04/2023
Nominal Hours
8
Description
This unit describes the skills and knowledge required to prepare, lay out and apply sheet laminates by hand to base materials in furniture and cabinetry production. Workers with this competency follow established procedures using discretion, judgement and some problem solving.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements from work documentation
  • 1.2 Plan task sequence and identify procedures for checking quality at each stage
  • 1.3 Identify and follow work health and safety procedures
  • 1.4 Select suitable work area for task
  • 1.5 Select tools and equipment and check that they are safe and functional.
  • 1.6 Select laminate and adhesives and check that they meet quality requirements
2. Lay out and prepare materials
  • 2.1 Prepare surfaces to be laminated using techniques suited to base material
  • 2.2 Prepare and lay out laminates
  • 2.3 Position joining tools, equipment and materials ready for task
3. Apply fit and finish
  • 3.1 Use tools and equipment safely and in accordance with workplace procedures
  • 3.2 Measure laminates within required tolerances and mark and cut to size
  • 3.3 Apply adhesives suited to base material in accordance with workplace procedures and manufacturer instructions
  • 3.4 Roll and hammer laminates to secure in accordance with workplace procedures
  • 3.5 Complete final trim and finishing to specifications
  • 3.6 Inspect completed work for compliance with quality requirements and rectify any deficiencies
4. Finalise task
  • 4.1 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 4.2 Clean tools and equipment, complete routine maintenance and leave in safe mode in accordance with workplace procedures
  • 4.3 Tag and report faulty equipment in accordance with workplace procedures
  • 4.4 Complete task documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI413 MSFFM2004 Apply sheet laminates by hand Unit of competency