Unit of competency Outline

Date retreived
22/07/2026 1:40 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out vehicle sectional repairs

Carry out vehicle sectional repairs

Unit of competency
National Code
AURVTN031
State Code
AWZ73
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030511 - Panel Beating
Original Release Date
13/07/2016
Nominal Hours
54
Description
This unit describes the performance outcomes required to carry out vehicle sectional repairs and replace components, including structural and non-structural vehicle components. It involves preparing for the task, selecting and using specialist tools and equipment, selecting repair methods, removing damaged components, repairing damaged sections, replacing and aligning new or repaired components, welding and finishing to pre-paint condition, and completing workplace processes and documentation.It applies to those working in the automotive body repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to carry out sectional repairs
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Original equipment manufacturer (OEM) or authorised agency’s specifications for joining methods are accessed and interpreted
  • 1.3 Materials for repair are selected and inspected for quality
  • 1.4 Hazards associated with the work are identified and risks are managed
  • 1.5 Tools and equipment are identified and checked for serviceability
  • 1.6 Work is planned to identify sectional repair methods, minimise waste, and use time efficiently
2. Perform sectional repairs
  • 2.1 Measurements are taken prior to repairs according to workplace procedures
  • 2.2 Damaged sections are removed according to approved repair methods and equipment, safety and environmental requirements
  • 2.3 Damaged surfaces are restored to a condition suitable for fitting new sections
  • 2.4 Replacement sections are aligned, secured and welded according to OEM or authorised agency’s specifications
  • 2.5 Sectional repairs are completed without causing damage to other vehicle components or systems
  • 2.6 Post-repair measurements are taken according to workplace procedures and compared with OEM or authorised agency’s specifications, and further corrective action is taken where non-compliance is identified
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and manufacturer specifications, and repaired vehicle is presented ready for painting
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF516 AURVTN3031 Conduct major sectional repairs Unit of competency