Unit of competency Outline

Date retreived
22/07/2026 11:29 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove and install framed type windscreens

Remove and install framed type windscreens

Unit of competency
National Code
AURVTG105
State Code
OCL46
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
13/11/2020
View on TGA
State Implementation and Classification
Approved Date
31/03/2021
Field of Education
040323 - Glazing
Original Release Date
31/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to remove and install framed type windscreens. This unit involves preparing for the task, selecting and using specialist tools and equipment, removing the windscreen, applying sealants, installing the windscreen according to manufacturer specifications, cleaning and finishing it, and completing workplace processes and documentation.The unit applies to those who work in the automotive glazing service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to remove and install framed type windscreen
  • 1.1 Identify job requirements from workplace instructions
  • 1.2 Identify required information for repair activity
  • 1.3 Identify hazards associated with the work, assess potential risks and implement control measures in line with workplace policies and procedures
  • 1.4 Identify tools, equipment and chemicals required for repair activity and establish serviceability according to workplace procedures
2. Carry out removal and installation activities
  • 2.1 Carry out windscreen removal according to workplace procedures, manufacturer specifications, workplace health and safety and environmental requirements
  • 2.2 Install, seal and finish replacement windscreen according to workplace procedures, manufacturer specifications, workplace health and safety and environmental requirements
  • 2.3 Cure adhesive according to adhesive manufacturer specifications and timelines
3. Complete work processes
  • 3.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
  • 3.2 Clear work area and dispose of or recycle materials according to workplace procedures
  • 3.3 Complete documentation according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AXA03 AURVTG005 Remove and install framed type windscreens Unit of competency
State Code National Code Title Type
BFY3 AUR32220 Certificate III in Automotive Glazing Technology Qualification