Unit of competency Outline
Date retreived
22/07/2026 9:02 PM AWST
22/07/2026 9:02 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Remove and install framed type windscreens
Remove and install framed type windscreens
Unit of competency
National Code
AURVTG005
AURVTG005
State Code
AXA03
AXA03
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
040323 - Glazing
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to remove and install framed type windscreens. It involves preparing for the task, selecting and using specialist tools and equipment, removing the windscreen, applying sealants, installing the windscreen according to manufacturer specifications, cleaning and finishing it, and completing workplace processes and documentation.It applies to those working in the automotive glazing service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for removal and installation of framed type windscreen
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Removal and installation information is accessed and interpreted from manufacturer specification, workplace procedures, and sealant safety data sheets (SDS)
- 1.3 Work is planned to minimise waste and use time efficiently
- 1.4 Vehicle is inspected to ensure there is no prior damage and that all related accessories are operating correctly
- 1.5 Materials and windscreen are selected and inspected for faults according to manufacturer specifications
- 1.6 Hazards associated with the work are identified and risks are managed
- 1.7 Tools and equipment are selected and checked for serviceability
- 1.8 Vehicle is protected and safely located according to workplace procedures
2. Carry out removal and installation activities
- 2.1 Windscreen is removed according to manufacturer specifications, and safety and environmental requirements, and without causing damage to vehicle or components
- 2.2 Replacement windscreen is installed, sealed and finished according to manufacturer specifications and safety and environmental requirements
- 2.3 Adhesive is cured according to adhesive manufacturer specifications and timelines, as required
3. Complete work processes
- 3.1 Final inspection is made to ensure work meets workplace expectations, related accessories are operating correctly, and vehicle is presented ready for use
- 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF474 | AURVTG2005 | Remove and install framed type windscreens | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCL46 | AURVTG105 | Remove and install framed type windscreens | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAF7 | AUR32216 | Certificate III in Automotive Glazing Technology | Qualification |