Unit of competency Outline
Date retreived
22/07/2026 7:43 PM AWST
22/07/2026 7:43 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Conduct explosives inspection
Conduct explosives inspection
Unit of competency
National Code
DEFEXO008
DEFEXO008
State Code
AVS28
AVS28
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit describes the skills required to conduct an inspection on all types of explosives in order to assess serviceability and to process further action. How the explosives are processed is subject to the outcomes of the inspection. In the case of defective or damaged explosives they may be retained and returned to the manufacturer, maintained or disposed of, or restrictions may be placed on their use.This unit applies to those required to conduct an inspection on all types of explosives.The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to.Those undertaking this unit would work independently and as part of a team, under direct and/or indirect supervision, use discretion and judgement, and take responsibility for the quality of their output. They would perform specific tasks in a broad range of contexts.No licensing, legislative or certification requirements apply to unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for inspection
- 1.1 Identify requirement for explosives inspection from work requests/instructions
- 1.2 Identify, acquire and prepare technical references, tools and equipment required for the inspection
- 1.3 Identify, acquire, account for, move or pre-position explosives in preparation for inspection
- 1.4 Identify, calculate, assess and apply net explosive quantities and compatibility
2 Inspect explosive
- 2.1 Inspect explosives in a logical set sequence to ensure that defects or damage are not overlooked
- 2.2 Identify and record damage or other defects
3 Carry out post inspection procedures
- 3.1 Make a serviceability recommendation for inspected explosives
- 3.2 Maintain documentation and records