Qualification Outline
22/07/2026 7:36 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Explosive Ordnance Manufacture
Certificate III in Explosive Ordnance Manufacture
DEF32115
AWW7
Replaced
Transition (Replaced)
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 22/10/2015 | Current | Approved |
Description
This qualification allows for the attainment of competencies in explosive ordnance manufacture.
No licensing, legislative or certification requirements apply to this qualification at the time of publication.
Schedule
Packaging Rules
Eighteen (18) units of competency are required for this qualification:- four (4) core units
- fourteen (14) elective units
Choose a minimum of twelve (12) electives from the list below, of which at least seven (7) must be taken from Group A.
Choose the remaining two (2) electives from the list below or from elsewhere within this training package, or from another endorsed training package, or from an accredited course.
All elective units selected from outside this qualification must reflect the occupational and learning outcomes of this AQF qualification level. Seek further advice on selecting imported units of competency in the DEF Implementation Guide.
Where a pre-requisite unit is attached to an elective unit it is identified by this symbol ∟.
The pre-requisite units attached to any of the elective units must be undertaken and are additional to the number of elective units required for the qualification.
Elective units selected must not duplicate content already covered by other units in this qualification.
1. Core Units
All four (4) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AUK29 | BSBWHS301 | Maintain workplace safety | 20 | Unit of competency |
| D5061 | TLID1001A | Shift materials safely using manual handling methods | 20 | Unit of competency |
| W9039 | MSAPMOHS210B | Undertake first response to non-fire incidents | 26 | Unit of competency |
| AVS35 | DEFEXO001 | Work safely with explosive ordnance | 0 | Unit of competency |
2. Group A Specialisation Units
At least seven (7) units must be chosen from Group A.
Please refer to the packaging rules for the full details of available options.
3. Group B General Elective Units
Up to seven (7) units may be chosen from Group B.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWX0 | DEF32312 | Certificate III in Explosive Ordnance Manufacture | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFU2 | DEF30220 | Certificate III in Explosive Ordnance Manufacture | Qualification |
No information
Entry Requirements
No information
Traineeships and Apprenticeships