Unit of competency Outline
Date retreived
22/07/2026 7:00 AM AWST
22/07/2026 7:00 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Control entry to confined spaces
Control entry to confined spaces
Unit of competency
National Code
DEFWHS013
DEFWHS013
State Code
AVO61
AVO61
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/08/2016
Field of Education
061301 - Occupational Health And Safety
Original Release Date
05/08/2016
Nominal Hours
0
Description
This unit involves the skills and knowledge required to control entry to confined spaces.It includes the skills required to control entry and egress to confined spaces. While exercising the control of entry to confined space may not require the competency to enter confined space, it requires awareness of the legislative requirements and organisational procedures related to confined space entry.In the context of this unit, a confined space is any compartment or area that has the capability of accumulating a toxic, flammable or explosive atmosphere, or of being flooded, in addition to one of the following characteristics:limited opening for accessno escape route or very restricted means of escapelimited natural ventilationatmosphere containing more than 23.5% or less than 19.5% oxygenThis unit applies to Defence personnel involved in the control of entry to confined spaces as a workplace responsibility but is applicable to all individuals who work in this field. Those undertaking this unit would work independently or as part of a team under, indirect supervision. They must be able to use discretion and judgement and take responsibility for the quality of their outputs. They would perform routine tasks in a range of familiar contexts.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare for control of confined space entry
- 1.1 Identify and confirm requirement for confined space entry from work requests/instructions
- 1.2 Identify confined space entry permit and any requirements or limitations
- 1.3 Confirm team and individual roles and responsibilities through question and answer
2 Control access and egress to confined space
- 2.1 Monitor and record entry and egress of the confined space in accordance with work permit conditions
- 2.2 Maintain verbal and non-verbal communication and consultation with the confined space entry team in accordance with work permit conditions
- 2.3 Complete documentation and reports
No information
No information
No information
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWW7 | DEF32115 | Certificate III in Explosive Ordnance Manufacture | Qualification |
| BFU2 | DEF30220 | Certificate III in Explosive Ordnance Manufacture | Qualification |
| AXA0 | DEF42215 | Certificate IV in Explosive Ordnance Proof and Experimental | Qualification |
| BFU5 | DEF40420 | Certificate IV in Explosive Ordnance Proof and Experimental | Qualification |
| BHY9 | DEF41122 | Certificate IV in Explosive Ordnance Proof and Experimental | Qualification |
| AWW1 | DEF43315 | Certificate IV in Work Health Safety | Qualification |