Unit of competency Outline

Date retreived
22/07/2026 1:13 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit avionic modification sheet metal components

Fit avionic modification sheet metal components

Unit of competency
National Code
MEAAVI0059
State Code
OEH71
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/11/2022
View on TGA
State Implementation and Classification
Approved Date
28/03/2023
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
28/03/2023
Nominal Hours
60
Description
This unit describes the skills and knowledge required to apply hand skills and use maintenance publications and modification documentation to perform sheet metal work associated with avionic modifications on small fixed and rotary wing aircraft during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.The unit is used in workplaces that operate under the airworthiness regulatory systems of the Civil Aviation Safety Authority (CASA) and the Defence Aviation Safety Authority (DASA).Any other relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to fit avionic modification sheet metal components
  • 1.1 Identify sheet metal components to be fitted, in accordance with modification instructions and maintenance documentation
  • 1.2 Select and organise all required materials and equipment in accordance with the applicable modification instructions and maintenance documentation
2. Fit avionic modification sheet metal components
  • 2.1 Fit sheet metal components in accordance with modification instructions, ensuring that aircraft standard practices and process requirements are carried out while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and personal protective equipment (PPE)
  • 2.2 Clean work area of all waste material in accordance with standard enterprise procedures
  • 2.3 Complete and process required documentation in accordance with standard enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
AUE59 MEA290 Fit avionic modification sheet metal components Unit of competency
No information