Unit of competency Outline

Date retreived
22/07/2026 4:13 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Fit avionic modification sheet metal components

Fit avionic modification sheet metal components

Unit of competency
National Code
MEA290
State Code
AUE59
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
31/08/2018
View on TGA
State Implementation and Classification
Approved Date
22/07/2015
Field of Education
031503 - Aircraft Maintenance Engineering
Original Release Date
22/07/2015
Nominal Hours
60
Description
This unit of competency requires application of hand skills and the use of maintenance publications and modification documentation to perform sheet metal work associated with avionic modifications being incorporated on small fixed and rotary wing aircraft during scheduled or unscheduled maintenance. Work may be performed individually or as part of a team.This unit of competency is part of the Avionic Certificate IV (Aircraft Maintenance Stream) training pathway.Where a Civil Aviation Safety Authority (CASA) licensing outcome is sought this unit forms part of the CASA requirement for the granting of the chosen maintenance certification licence under Civil Aviation Safety Regulation (CASR) Part 66, in accordance with the licensing provisions in the Companion Volume Implementation Guide.
Notes
Elements and Performance Criteria
1. Prepare to fit avionic modification sheet metal components
  • 1.1 Applicable sheet metal components are identified in accordance with applicable modification instructions and maintenance documentation
  • 1.2 All required materials and equipment are selected and organised in accordance with the applicable modification instructions and maintenance documentation
2. Fit avionic modification sheet metal components
  • 2.1 Sheet metal components are fitted in accordance with the modification instructions, ensuring that aircraft standard practices are used and standard process requirements are carried out while observing all relevant work health and safety (WHS) requirements, including the use of material safety data sheets (MSDS) and personal protective equipment (PPE)
  • 2.2 Work area is cleaned of all waste material
3. Complete modification activities
  • 3.1 Required documentation is accurately completed and correctly processed in accordance with enterprise procedures
No information
No information
Replaces
State Code National Code Title Type
D4460 MEA290A Fit avionic modification sheetmetal components Unit of competency
Replaced By
State Code National Code Title Type
OEH71 MEAAVI0059 Fit avionic modification sheet metal components Unit of competency