Unit of competency Outline
Date retreived
23/07/2026 4:50 AM AWST
23/07/2026 4:50 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Undertake qualification testing of new or enhanced equipment and systems
Undertake qualification testing of new or enhanced equipment and systems
Unit of competency
National Code
ICTTEN601
ICTTEN601
State Code
AWD02
AWD02
TGA Status
Replaced
Replaced
DTWD Status
Transition (Replaced)
Transition (Replaced)
State Implementation and Classification
Approved Date
05/07/2016
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
05/07/2016
Nominal Hours
120
Description
This unit describes the skills and knowledge required to inspect and test international telecommunications network equipment not previously installed in an Australian network. It involves assessing its suitability and compliance with local regulations and conditions for the carrier or asset owner.It applies to individuals working as field officers, technicians or technical supervisors for carriers, contractors or other service providers, who verify compliance of new equipment or systems with Australian standards.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Ensure conformity of international design to Australian standards
- 1.1 Assess original international design to verify compliance with relevant Australian legislation, codes, regulations and standards
- 1.2 Reconfigure international design in consultation with customer
- 1.3 Rewrite design specifications to include configuration amendments
2. Plan and establish test regime
- 2.1 Plan type and number of tests to ensure full trial of new or enhanced design and greatest coverage for minimal tests
- 2.2 Plan and establish test environment to ensure total validity of chosen tests
- 2.3 Design test regime of proposed system to test impact on existing systems
- 2.4 Confirm test regime in consultation with planners and verify test equipment meets required standards
3. Undertake tests
- 3.1 Conduct and document tests including live system tests in logical and sequential order to planned test regime
- 3.2 Negotiate problems experienced during tests with system experts or designers to plan contingency activity according to enterprise policy
- 3.3 Prepare and submit trouble reports according to enterprise policy
4. Analyse test results
- 4.1 Analyse test results against design specifications and planned outcomes
- 4.2 Prepare a report referring major deficiencies to designers with recommendations for design change
- 4.3 Analyse minor variances, plan solutions and document changes to specifications
5. Retest design changes
- 5.1 Implement design and specification changes and conduct further tests as required
- 5.2 Analyse test results to verify compliance with updated design specifications
- 5.3 Document results of tests according to enterprise policy
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| D3493 | ICTTEN6036A | Undertake qualification testing of new or enhanced equipment and systems | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCV65 | ICTTEN613 | Assess integration of international network equipment into Australian networks | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZI7 | ICT60615 | Advanced Diploma of Telecommunications Network Engineering | Qualification |