Unit of competency Outline
Date retreived
22/07/2026 4:53 PM AWST
22/07/2026 4:53 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Assess integration of international network equipment into Australian networks
Assess integration of international network equipment into Australian networks
Unit of competency
National Code
ICTTEN613
ICTTEN613
State Code
OCV65
OCV65
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
29/03/2021
Field of Education
020113 - Networks And Communications
Original Release Date
29/03/2021
Nominal Hours
120
Description
This unit describes the skills and knowledge required to inspect and test international network equipment not previously installed in an Australian network. It involves assessing its suitability and compliance with local regulations and conditions for the carrier or asset owner.It applies to individuals working as field officers, technicians or technical supervisors for carriers, contractors or other service providers, who verify compliance of new equipment or systems with Australian standards.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine compliance of international network equipment designs with Australian standards
- 1.1 Obtain international and Australian network designs and design requirements from relevant personnel, and arrange for site access in compliance with required security arrangements, legislation, codes, regulations and standards
- 1.2 Analyse international designs and verify compliance with required Australian legislation, codes, regulations and standards
- 1.3 Reconfigure international design in consultation with relevant personnel
- 1.4 Rewrite design specifications and include configuration amendments
2. Plan network integration tests
- 2.1 Determine type and number of tests that will confirm a full trial of new designs and provide the greatest coverage of minimal tests
- 2.2 Establish test environment that will confirm total validity of chosen tests
- 2.3 Design test regime of proposed network to test impact on existing network
- 2.4 Confirm test regime in consultation with relevant personnel and verify that test equipment meets required standards
3. Test integration of international network equipment into Australian networks
- 3.1 Conduct and document required tests in logical and sequential order according to plans
- 3.2 Negotiate problems experienced during tests with relevant personnel and plan contingency activity according to enterprise policy
- 3.3 Prepare and submit trouble reports according to enterprise policy
4. Analyse test results
- 4.1 Analyse test results against design specifications and planned outcomes obtained from relevant personnel
- 4.2 Prepare a report referring major deficiencies to relevant personnel with recommendations for design change
- 4.3 Analyse minor variances, plan solutions and document changes to specifications
5. Complete assessment of integration of international network equipment into Australian networks
- 5.1 Implement design and specification changes and conduct further tests as required
- 5.2 Analyse test results and verify compliance with updated design specifications
- 5.3 Document results of tests according to enterprise policy
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWD02 | ICTTEN601 | Undertake qualification testing of new or enhanced equipment and systems | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BGJ5 | ICT60220 | Advanced Diploma of Information Technology | Qualification |