Unit of competency Outline

Date retreived
22/07/2026 4:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install fitted cabinets and components

Install fitted cabinets and components

Unit of competency
National Code
MSFKB3006
State Code
WI561
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/05/2020
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
19/06/2014
Nominal Hours
30
Description
This unit of competency covers installing cabinets in residential and commercial environments according to specifications and design plans, including the application of selected components to achieve a quality finish. It includes accessing and applying information and instructions for the use of components and cabinet products. Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking kitchen and bathroom work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Determine requirements for cabinet components
  • 1.1 Workplace health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.2 Information resources for cabinet components is identified and accessed to inform the installation
  • 1.3 Features of components are identified and verified as suitable for the application
  • 1.4 Tools and equipment required for applying components are identified and prepared
  • 1.5 Cabinets are checked to ensure markings and holes required for components are correctly located
2 Install cabinets
  • 2.1 Designs or plans are interpreted to determine cabinet installation requirements
  • 2.2 Cabinet markings are confirmed to ensure accurate installation
  • 2.3 Measurements are made to confirm fit
  • 2.4 Cabinets are installed according to plans and specifications
  • 2.5 Appliance installation requirements and service features are accommodated in installation
  • 2.6 Components are fixed according to cabinet requirements
  • 2.7 Hand and power tools are used safely and efficiently
  • 2.8 Work area is cleaned and rubbish disposed of according to environmental standards
3 Check quality finish
  • 3.1 Measurements are made to ensure cabinet is square and level
  • 3.2 Edges and lines are checked to ensure fit is level, straight and flush
  • 3.3 Doors, drawers, runners, handles and latches are checked for correct alignment
  • 3.4 Tolerances are checked to ensure they meet standard requirements
  • 3.5 Workplace documentation is completed
No information
No information
Replaces
State Code National Code Title Type
D2768 LMFKB3006A Install fitted cabinets and components Unit of competency
Replaced By
State Code National Code Title Type
OEJ94 MSFFM3043 Install cabinetry Unit of competency
State Code National Code Title Type
J739 MSF31113 Certificate III in Cabinet Making Qualification
AD650 MSFSS00005 Fitted Furniture Installer Skill set