Unit of competency Outline

Date retreived
23/07/2026 10:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install cabinetry

Install cabinetry

Unit of competency
National Code
MSFFM3043
State Code
OEJ94
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030113 - Cabinet Making
Original Release Date
19/04/2023
Nominal Hours
45
Description
This unit describes the skills and knowledge required to install custom-made or mass manufactured cabinetry and all associated fixtures and fittings. It requires the ability to complete pre-installation checks, identify site constraints, install products and complete quality checking of finished work.Cabinet installers with this competency follow established procedures using discretion, judgement and problem solving to install cabinetry and resolve installation issues, often in consultation with others. Installers may or may not have been involved in the actual construction of cabinetry. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1 Prepare for installation
  • 1.1 Determine installation requirements and sequencing from design and other work documentation
  • 1.2 Select and prepare required tools, equipment and materials based on task requirements
  • 1.3 Complete pre-checks on cabinetry in accordance with workplace procedures
  • 1.4 Identify customer and others involved in installation process and establish communication based on task requirements
2 Identify site conditions and constraints
  • 2.1 Obtain access to site in accordance with project guidelines and work health and safety requirements
  • 2.2 Identify site safety hazards and take action to reduce risk to self and others
  • 2.3 Identify other on-site characteristics for their impact on the installation process
  • 2.4 Protect site features, fixtures and fittings using suitable coverings prior to start of installation
3 Install products
  • 3.1 Prepare products and materials to site requirements
  • 3.2 Install products and associated hardware using hand and power tools safely and according to manufacturer instructions
  • 3.3 Take and confirm measurements and levels during process to achieve correct fit and overall installation quality
  • 3.4 Use fixing methods and products according to site conditions and product requirements
  • 3.5 Identify and accommodate services and appliance installation requirements
4 Complete quality checks
  • 4.1 Inspect edges and lines and confirm fit is level, straight and flush
  • 4.2 Inspect all installed cabinet components and confirm correct alignment
  • 4.3 Confirm that required tolerances have been achieved
  • 4.4 Measure installed cabinet components and check that they comply with spatial and other specifications from design and other work documentation
  • 4.5 Identify installation deficiencies and use problem solving skills to achieve required outcome
5 Finalise installation process
  • 5.1 Clean work area and dispose of waste safely and in accordance with environmental standards
  • 5.2 Check, clean and store tools and equipment in accordance with workplace procedures
  • 5.3 Seek and document customer approval of completed installation in accordance with workplace procedures
  • 5.4 Complete installation documentation in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WI559 MSFKB3004 Conduct on-site adjustments to cabinets and components Unit of competency
WI561 MSFKB3006 Install fitted cabinets and components Unit of competency
WI427 MSFFM3006 Install furnishing products Unit of competency