Unit of competency Outline

Date retreived
22/07/2026 10:59 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct on-site adjustments to cabinets and components

Conduct on-site adjustments to cabinets and components

Unit of competency
National Code
MSFKB3004
State Code
WI559
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030113 - Cabinet Making
Original Release Date
19/06/2014
Nominal Hours
15
Description
This unit of competency covers determining required cabinet adjustments, selecting appropriate techniques, and making and checking the adjustments to pre-made cabinets in order to achieve accurate fit at site of installation. Licensing, legislative or certification requirements may apply to this unit and relevant state/territory and local government agencies should be consulted to determine any necessary certification or licensing for undertaking kitchen and bathroom work. Access to construction sites requires certification of general induction training specified by the National Code of Practice for Induction for Construction Work (ASCC 2007).
Notes
Elements and Performance Criteria
1 Determine required adjustment techniques
  • 1.1 Access to site is obtained according to project guidelines and work health and safety (WHS) procedures
  • 1.2 Measurements and required adjustments are examined
  • 1.3 Problem-solving skills are applied and techniques selected to conduct adjustments with minimal disruption to cabinet construction
  • 1.4 Cabinet design is checked to ensure design and industry standards will be maintained with completion of cabinet adjustments
2 Make adjustments
  • 2.1 Cabinet markings are inspected and confirmed to ensure accurate adjustments
  • 2.2 Adjustments are conducted using appropriate techniques and tools
  • 2.3 Area is cleaned and rubbish disposed of according to environmental standards
3 Confirm accurate fit
  • 3.1 Measurements are made to ensure cabinet readiness for installation
  • 3.2 Edges and lines are measured to ensure fit is straight and flush
  • 3.3 Doors, drawers, runners, handles and latches are checked for correct alignment
  • 3.4 Tolerances are checked to ensure standards are achieved
  • 3.5 Workplace documentation is completed
No information
No information
Replaces
State Code National Code Title Type
D2766 LMFKB3004A Conduct on-site adjustments to cabinets and components Unit of competency
Replaced By
State Code National Code Title Type
OEJ94 MSFFM3043 Install cabinetry Unit of competency
State Code National Code Title Type
J739 MSF31113 Certificate III in Cabinet Making Qualification
AD650 MSFSS00005 Fitted Furniture Installer Skill set