Unit of competency Outline

Date retreived
22/07/2026 9:41 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Receive materials

Receive materials

Unit of competency
National Code
PPMRES260
State Code
AXG56
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
06/05/2016
View on TGA
State Implementation and Classification
Approved Date
25/08/2016
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
25/08/2016
Nominal Hours
40
Description
This unit of competency describes the outcomes required to receive materials in a pulp or paper manufacturing facility. The unit applies to production support operators who check, weigh and record load data and direct trucks for unloading. Receiving and weighing procedures may be fully electronic, semi-electronic or manual.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Receive materials.
  • 1.1. Identify and review site receiving procedures for materials according to standard operating procedures (SOPs).
  • 1.2. Identify and accept trucks delivering load as per work (WHS) and environmental regulations.
2. Check and weigh load and record data.
  • 2.1. Weigh load using weighing systems according to site procedures.
  • 2.2. Handle non-conforming loads according to site procedures and safe work requirements and practices.
  • 2.3. Record weight of load and load conformance information.
  • 2.4. Obtain delivery record from truck driver.
3. Direct trucks for unloading.
  • 3.1. Notify workforce of deliveries that require unloading.
  • 3.2. Direct truck to designated unloading site.
  • 3.3. Monitor and control truck traffic in the receiver area according to site procedures and safe work requirements and practices.
No information
No information
Replaces
State Code National Code Title Type
AUY43 FPPRES260A Receive materials Unit of competency
Replaced By
State Code National Code Title Type
ODT70 PPMRES201 Receive materials Unit of competency
State Code National Code Title Type
BAH5 PPM20216 Certificate II in Papermaking Operations Qualification
BAH4 PPM20116 Certificate II in Pulping Operations Qualification