Unit of competency Outline

Date retreived
22/07/2026 8:30 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Receive materials

Receive materials

Unit of competency
National Code
PPMRES201
State Code
ODT70
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/02/2022
View on TGA
State Implementation and Classification
Approved Date
31/05/2022
Field of Education
089901 - Purchasing, Warehousing And Distribution
Original Release Date
31/05/2022
Nominal Hours
40
Description
This unit of competency describes the skills and knowledge required to receive, check, weigh and direct trucks for unloading raw materials for pulp or paper manufacturing.The unit applies to production support operators who carry out routine tasks in receiving raw materials for a pulp and/or paper manufacturing facility. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to receive materials
  • 1.1 Identify and confirm material stock order to be received
  • 1.2 Plan and sequence work tasks according to delivery specifications, workplace procedures and workplace health and safety requirements
  • 1.3 Identify health and safety hazards and report safety concerns
  • 1.4 Select required personal protective equipment and measuring and weighing equipment for the task
  • 1.5 Notify yard personnel of deliveries requiring unloading
  • 1.6 Prepare and maintain unloading areas according to housekeeping and environmental requirements
2. Check and weigh load and record data
  • 2.1 Check incoming material load against order and delivery documentation
  • 2.2 Receive, inspect and weigh load according to workplace health and safety and workplace procedures
  • 2.3 Handle non-conforming loads according to workplace procedures
  • 2.4 Record weight of load and load conformance information
  • 2.5 Confirm and record load details according to workplace requirements
3. Direct trucks for unloading
  • 3.1 Direct truck to designated unloading site
  • 3.2 Monitor and control truck traffic in the receiver area according to safe work requirements and practices
  • 3.3 Communicate load requirements to relevant personnel
No information
No information
Replaces
State Code National Code Title Type
AXG56 PPMRES260 Receive materials Unit of competency
State Code National Code Title Type
BHM0 PPM20121 Certificate II in Pulp and Paper Operations Qualification