Unit of competency Outline

Date retreived
22/07/2026 11:27 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use mechanised equipment for forestry site preparation on steep slopes

Use mechanised equipment for forestry site preparation on steep slopes

Unit of competency
National Code
FWPHAR3233
State Code
OCR38
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
04/12/2020
View on TGA
State Implementation and Classification
Approved Date
07/04/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
07/04/2021
Nominal Hours
70
Description
This unit of competency describes the skills and knowledge required to set up and operate mechanised equipment for forestry site preparation on steep slopes. The unit also includes preparing for site preparation activities, conducting pre-operational equipment checks and implementing operator maintenance.The unit applies to individuals who work as forestry machine operators in a forest or plantation setting. All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for site preparation activities
  • 1.1 Determine job requirements from work order or instruction and, where required, seek clarification from appropriate personnel
  • 1.2 Confirm safety and environmental protection requirements for the task according to workplace procedures
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with using mechanised equipment for forestry site preparation on steep slopes
  • 1.4 Identify emergency plan procedures to follow in the event of an emergency
  • 1.5 Identify location of site preparation task
  • 1.6 Plan site preparation activities according to work order or instruction
  • 1.7 Consult with appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.8 Select mechanised equipment and ground engaging attachment suitable for site preparation task
  • 1.9 Check serviceability of mechanised equipment and ground engaging attachment
  • 1.10 Select, fit and use personal protective equipment
2. Set up and operate machine
  • 2.1 Carry out pre-start and start-up checks according to manufacturer instructions and workplace procedures
  • 2.2 Identify faults or defects and rectify or report within scope of own responsibility according to workplace procedures
  • 2.3 Drive, control and manoeuvre machine with site preparation attachments using techniques suited to equipment capabilities, site characteristics, slope and work conditions
  • 2.4 Engage and disengage attachment according to manufacturer instructions and workplace procedures
  • 2.5 Identify, remove or manage contaminants according to workplace procedures
  • 2.6 Monitor and manage machine performance using appropriate indicators to ensure efficiency of operations
  • 2.7 Monitor hazards and risks during operations and ensure safety of self, other personnel, plant and equipment
  • 2.8 Park, shut down, secure and carry out post-operational inspection of machine according to workplace procedures
3. Carry out operator maintenance
  • 3.1 Lock out machine according to workplace safety and manufacturer requirements
  • 3.2 Access tools and service equipment required for performing routine maintenance according to manufacturer instructions
  • 3.3 Check ground engaging attachments for wear and damage at appropriate or recommended intervals
  • 3.4 Complete operator maintenance tasks according to manufacturer recommendations and workplace procedures
  • 3.5 Record and report production outcomes and equipment faults to appropriate personnel
No information
No information
Replaced By
State Code National Code Title Type
ODS02 FWPSIL3003 Use mechanised equipment for forestry site preparation Unit of competency
State Code National Code Title Type
BAL0 FWP30216 Certificate III in Harvesting and Haulage Qualification