Unit of competency Outline

Date retreived
22/07/2026 8:14 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use mechanised equipment for forestry site preparation

Use mechanised equipment for forestry site preparation

Unit of competency
National Code
FWPSIL3003
State Code
ODS02
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
28/01/2022
View on TGA
State Implementation and Classification
Approved Date
21/06/2022
Field of Education
030717 - Plant And Machine Operations
Original Release Date
21/06/2022
Nominal Hours
70
Description
This unit of competency describes the skills and knowledge required to perform forestry site preparation activities using mechanised equipment. Individuals seeking to undertake this unit should have prior experience or competency in operating a bulldozer, excavator, skidder or tractor.The unit applies to individuals who use forestry machines for forestry site preparation operations.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for site preparation activities
  • 1.1 Determine job requirements from work order or instruction, and where required seek clarification from appropriate personnel
  • 1.2 Confirm safety and environmental protection requirements, including use of personal protective equipment, for the task according to workplace procedures
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with using mechanised equipment for forestry site preparation
  • 1.4 Identify emergency plan procedures
  • 1.5 Identify location of site preparation task and plan site preparation activities according to work order or instruction
  • 1.6 Consult with appropriate personnel to ensure that work is coordinated effectively with others in the workplace
  • 1.7 Select and check the serviceability of mechanised equipment and ground-engaging attachments required for site preparation task
  • 1.8 Check positioning of warning signs and operation of vehicle-to-vehicle communication systems to maintain communication and workplace safety during forestry site preparation operations
2. Prepare forestry site using mechanised equipment
  • 2.1 Carry out pre-start and start-up machine checks according to manufacturer instructions and workplace procedures
  • 2.2 Identify machine faults or defects and rectify or report within scope of own responsibility according to workplace procedures
  • 2.3 Drive, control and manoeuvre machine with ground-engaging attachments, to perform site preparation activities according to equipment capabilities, site characteristics and work order or instructions
  • 2.4 Engage and disengage attachment according to manufacturer instructions and workplace procedures
  • 2.5 Identify, remove or manage contaminants according to workplace procedures
  • 2.6 Monitor and manage machine performance using appropriate indicators to ensure efficiency of operations
  • 2.7 Carry out and monitor site preparation activities to ensure compliance with work order and environment protection requirements
  • 2.8 Monitor hazards and risks during operations and ensure safety of self, other personnel, plant and equipment
  • 2.9 Park, shut down, secure and carry out post-operational inspection of machine according to workplace procedures
  • 2.10 Complete report on site preparation activities and forward to appropriate personnel
3. Carry out operator maintenance
  • 3.1 Lock out machine according to workplace safety and manufacturer requirements
  • 3.2 Access tools and service equipment required for performing routine maintenance according to manufacturer instructions
  • 3.3 Check machine and ground-engaging attachments for wear and damage and perform operator maintenance tasks according to manufacturer recommendations and workplace procedures
  • 3.4 Complete maintenance records according to manufacturer and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
OCR38 FWPHAR3233 Use mechanised equipment for forestry site preparation on steep slopes Unit of competency
State Code National Code Title Type
BHK7 FWP30122 Certificate III in Forest Operations Qualification
BHL3 FWP30121 Certificate III in Forest Operations Qualification