Unit of competency Outline

Date retreived
22/07/2026 7:48 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce complex rotary die cut or embossed product

Produce complex rotary die cut or embossed product

Unit of competency
National Code
ICPCBF3280
State Code
OBP54
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
06/05/2020
View on TGA
State Implementation and Classification
Approved Date
20/08/2020
Field of Education
030103 - Printing
Original Release Date
20/08/2020
Nominal Hours
20
Description
This unit describes the skills and knowledge required to produce complex rotary die cut or embossed product, maintain operation of machinery and the production process, rectify problems and shut down the equipment.It applies to individuals who work under direct supervision with limited responsibility in preparing materials and equipment and resolving issues to produce a finished product.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Maintain operation of delivery systems
  • 1.1 Monitor and adjust delivery systems
  • 1.2 Add substrate to and remove substrate from the process according to job specifications
2. Maintain operation of complex rotary die cutting or embossing process
  • 2.1 Review and adjust knife condition and cutting pressures according to sample quality requirements
  • 2.2 Check and adjust registration of knife(s)
  • 2.3 Check and adjust packing of cutting devices
3. Maintain production process
  • 3.1 Monitor and adjust in-line processes
  • 3.2 Use machine controls as required
  • 3.3 Review and verify performance using the process control system
  • 3.4 Report process adjustments to eliminate problems according to enterprise procedures
4. Identify and rectify rotary cutting machine problems and faults
  • 4.1 Identify and report problems in cutting machine operation according to enterprise procedures
  • 4.2 Carry out adjustments or corrections according to specified procedures, and within scope of own role
  • 4.3 Verify repairs and adjustments as required prior to resumption of operations
5. Conduct shutdown of production process
  • 5.1 Follow shutdown sequence according to manufacturer specifications and enterprise procedures
  • 5.2 Remove solid and liquid waste from operating area and recycle and dispose of, as required, according to regulatory requirements and enterprise procedures
  • 5.3 Clean and disengage all required parts of machinery used in printing process according to manufacturer specifications and enterprise procedures
  • 5.4 Sharpen cutting devices according to work health and safety (WHS) requirements
  • 5.5 Complete required production records and enterprise documentation
No information
No information
Replaces
State Code National Code Title Type
AUM64 ICPCBF328 Produce complex rotary die cut or embossed product Unit of competency