Unit of competency Outline

Date retreived
23/07/2026 5:00 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce drawings manually

Produce drawings manually

Unit of competency
National Code
AUMATA008
State Code
WH907
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030501 - Automotive Engineering
Original Release Date
11/03/2014
Nominal Hours
35
Description
This unit describes the skills and knowledge required to produce drawings using manual drafting techniques.It applies to those in an automotive and related component manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan drawings
  • 1.1 Project objectives and design brief are defined and clarified according to workplace procedures
  • 1.2 Drafting requirements and processes are clarified based on project objectives and specifications
  • 1.3 Drawing specifications are identified and confirmed with appropriate personnel
  • 1.4 Required drawing resources are selected
2. Prepare and check drawings
  • 2.1 Critical dimensions and data for the required drawing are established
  • 2.2 Preliminary sketches are prepared and reviewed with appropriate personnel
  • 2.3 Drawings are prepared according to project objectives, specifications and workplace procedures
  • 2.4 Drawings are checked against project objectives, specifications and workplace quality standards, and necessary changes are made
3. Document drawings
  • 3.1 Drawings and technical information are documented according to project requirements and workplace procedures
  • 3.2 Drawings are processed for approval by appropriate personnel
  • 3.3 Drawings and associated documentation are stored according to workplace procedures
No information
No information
No information