Unit of competency Outline

Date retreived
23/07/2026 7:57 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Move block and bulk glass sheet by mechanical means

Move block and bulk glass sheet by mechanical means

Unit of competency
National Code
MSFGG3003
State Code
WI485
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040323 - Glazing
Original Release Date
19/06/2014
Nominal Hours
16
Description
This unit of competency covers moving block/bulk flat glass by mechanical means in workplaces which are involved in the manufacture, processing and/or installation of sheet glass. It may include meeting local licensing requirements for use of slings and chains where these apply.
Notes
Elements and Performance Criteria
1 Prepare for the task
  • 1.1 Work requirements in the form of type and quantity of glass to be relocated are identified from work instructions
  • 1.2 Work health and safety(WHS) requirements for movement of bulk/block glass sheet by mechanical means, including personal protective equipment, are observed throughout the work
  • 1.3 Blocks of glass sheet to be moved are identified and weight estimated or calculated
  • 1.4 Appropriate mechanical handling equipment is identified
  • 1.5 Risks to self, others, material and equipment are identified arising from the required lifting, load carrying, set down or movement of the glass
  • 1.6 Equipment and controls, including emergency stops and guards, are identified and checked for safe operation, and any damaged or worn parts reported to appropriate personnel
  • 1.7 Glass is checked for imperfections and damage prior to movement
2 Plan glass movement
  • 2.1 Locations for glass storage are identified and routes to be followed determined
  • 2.2 Required clearances are compared to available space and adjustments made
  • 2.3 Process for relocating glass is planned, including predicting and planning for potential difficulties
  • 2.4 Proposed process is checked against advisory standards and workplace procedures for compliance
3 Relocate glass
  • 3.1 Equipment is operated in accordance with approved advisory standards, manufacturer instructions, workplace procedures and WHS requirements
  • 3.2 Planned process and route are followed and glass relocated without damage to material and equipment or injury
  • 3.3 Glass is labelled and stored following workplace procedures ensuring there are no projections
  • 3.4 Relocation is checked to see that it meets work requirements, and any differences are reported
4 Complete work
  • 4.1 Waste and scrap material are removed for disposal or recycling, as required
  • 4.2 Work area is cleaned and rubbish disposed of, as appropriate
  • 4.3 Handling equipment is cleaned, maintained and stored according to workplace procedures
  • 4.4 Workplace documentation is completed, as required
No information
No information
Replaces
State Code National Code Title Type
S7820 LMFGG3003C Move block bulk glass sheet by mechanical means Unit of competency
Replaced By
State Code National Code Title Type
OAJ04 MSFGG3040 Move block and bulk glass sheet by mechanical means Unit of competency
State Code National Code Title Type
J732 MSF30413 Certificate III in Glass and Glazing Qualification