Unit of competency Outline

Date retreived
22/07/2026 9:11 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Move block and bulk glass sheet by mechanical means

Move block and bulk glass sheet by mechanical means

Unit of competency
National Code
MSFGG3040
State Code
OAJ04
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
16
Description
This unit describes the skills and knowledge required to plan for and move block and bulk flat glass by mechanical means in workplaces which are involved in the manufacture, processing and/or installation of sheet glass. This unit applies to glass processing workers.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for the task
  • 1.1 Read work instructions and identify type and quantity of glass to be relocated
  • 1.2 Identify and follow work health and safety requirements, using all required personal protective equipment
  • 1.3 Identify blocks of glass sheet to be moved and estimate or calculate weight using appropriate method
  • 1.4 Identify risks to self, others, material and equipment arising from the required lifting, load carrying, set down or movement of glass
  • 1.5 Correctly identify mechanical handling equipment based on the size, weight and type of glass
2. Plan glass movement
  • 2.1 Identify destination for glass and routes to be followed based on work order or storage procedures
  • 2.2 Compare required clearances to available space and make required adjustments
  • 2.3 Plan process for relocating glass in accordance with workplace procedures, and include contingency measures for potential difficulties
  • 2.4 Check proposed process against advisory standards and workplace procedures for compliance
3. Relocate glass
  • 3.1 Set and test equipment settings and safety controls in accordance with workplace procedures with faulty equipment tagged and alternative arrangements made
  • 3.2 Check glass for imperfections and damage prior to movement
  • 3.3 Operate equipment in accordance with approved advisory standards, manufacturer instructions, workplace procedures and safety requirements
  • 3.4 Follow planned process and route and relocate glass without injury or damage to material and equipment
  • 3.5 Label glass in accordance with workplace procedures, ensuring there are no projections
  • 3.6 Check relocation against work requirements, and report any differences to relevant personnel
4. Complete work
  • 4.1 Clean, maintain and store handling equipment in accordance with workplace procedures
  • 4.2 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI485 MSFGG3003 Move block and bulk glass sheet by mechanical means Unit of competency
State Code National Code Title Type
BHR1 MSF30422 Certificate III in Glass and Glazing Qualification
BEC9 MSF30418 Certificate III in Glass and Glazing Qualification