Qualification Outline
22/07/2026 10:13 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate III in Glass and Glazing
Certificate III in Glass and Glazing
MSF30422
BHR1
Current
Approved
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 3.00 | 21/12/2022 | Current | Approved |
| 2.00 | 08/12/2022 | Replaced | Approved |
| 1.00 | 03/06/2022 | Replaced | Approved |
Description
This qualification reflects the role of individuals involved in manufacturing, processing, moving or installing various types of glass products. Job roles may be in glass processing, glazing or designed glazing in both residential and commercial operations.
Workers use a range of technical knowledge to perform skilled work involving known routines, methods and procedures. They use discretion and judgement to adapt and transfer their skills and knowledge to different job needs and take responsibility for their own work within organisational parameters.
In some states and territories there may be licensing requirements that link to this qualification, and other licensing requirements where the individual is required to work onsite. Depending on the jurisdiction, licensing or regulatory requirements may also apply to the use of some units in this qualification. Licensing of glazing work applies in Queensland, NSW and South Australia. Local regulations should be checked for details.
Schedule
Packaging Rules
Total number of units = twenty three (23) including:- eight (8) core units
- fifteen (15) elective units consisting of:
- one (1) unit only from Group A
- at least eight (8) units in any combination from Groups B, C, D or E
- up to six (6) additional units from Group B, C, D, E, F, or any endorsed Training Package or accredited course. These units must be relevant to the work outcome as outlined in the qualification description above, must not duplicate the outcome of other units available within this qualification, and if imported from other Training Packages, at least four (4) must be units reflecting outcomes at AQF level 3 or higher.
Electives may be packaged to provide a qualification with a specialisation. General packaging rules must still be met when packaging units for a specialisation.
All Group B electives and at least six (6) Group C electives, including those marked with ‘#’, must be selected for the award of MSF30421 Certificate III in Glass and Glazing (Glass Processing).
All Group B electives and at least six (6) Group D electives, including those marked with ‘#’, plus at least one (1) installation unit (MSFGG3033 - MSFGG3037), must be selected for the award of MSF30421 Certificate III in Glass and Glazing (Glazing).
At least three (3) Group E electives, including those marked with ‘#’, must be selected for the award of MSF30421 Certificate III in Glass and Glazing (Designed Glazing).
1. Core Units
All eight (8) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AWC20 | MSMSUP102 | Communicate in the workplace | 26 | Unit of competency |
| OAJ22 | MSFGG2014 | Cut thin glass by hand | 55 | Unit of competency |
| WI512 | MSFGN2001 | Make measurements and calculations | 20 | Unit of competency |
| OAJ06 | MSFGG3039 | Manually move glass | 20 | Unit of competency |
| AWC13 | MSMENV272 | Participate in environmentally sustainable work practices | 20 | Unit of competency |
| OAJ25 | MSFGG2015 | Process glass by basic machines | 45 | Unit of competency |
| OCD30 | HLTAID011 | Provide First Aid | 18 | Unit of competency |
| AWC31 | MSMSUP106 | Work in a team | 26 | Unit of competency |
2. Group A Elective Units
One (1) unit only to be selected.
Please refer to the packaging rules (on TGA) for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAP37 | CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | 32 | Unit of competency |
| AWC15 | MSMWHS200 | Work safely | 26 | Unit of competency |
3. Group B Elective Units
Please refer to packaging rules (on TGA).
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAJ23 | MSFGG2013 | Move single glass sheets by mechanical means | 16 | Unit of competency |
4. Group C Electives - Glass Processing
Please refer to packaging rules (on TGA).
5. Group D Elective Units - Glazing
Please refer to packaging rules (on TGA).
6. Group E Elective Units - Designed Glazing
Please refer to packaging rules (on TGA).
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| OAK00 | MSFDG3004 | Assemble copper foil glass components | 100 | Unit of competency |
| OAK04 | MSFDG2001 | Assemble leadlight and stained glass components | 50 | Unit of competency |
| OAJ19 | MSFGG3022 | Construct and repair leadlight panels | 56 | Unit of competency |
| OAJ21 | MSFGG3024 | Form glass | 40 | Unit of competency |
| OAJ99 | MSFDG3005 | Fuse glass | 70 | Unit of competency |
| OAK01 | MSFDG3003 | Paint and fire glass | 70 | Unit of competency |
| OAK03 | MSFDG3002 | Prepare and install architectural engineered leadlight and stained glass | 60 | Unit of competency |
| OAJ98 | MSFDG3006 | Process coloured and textured glass by hand | 55 | Unit of competency |
| OAK02 | MSFDG3001 | Protect leadlight and stained glass | 30 | Unit of competency |
7. Group F Elective units
Please refer to packaging rules (on TGA).
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| BEC9 | MSF30418 | Certificate III in Glass and Glazing | Qualification |
No information
Entry Requirements
Nil
Traineeships and Apprenticeships