Unit of competency Outline

Date retreived
23/07/2026 5:18 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Glaze and reglaze residential windows and doors

Glaze and reglaze residential windows and doors

Unit of competency
National Code
MSFGG2011
State Code
OAJ27
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/12/2018
View on TGA
State Implementation and Classification
Approved Date
22/05/2019
Field of Education
040323 - Glazing
Original Release Date
22/05/2019
Nominal Hours
72
Description
This unit describes the skills and knowledge required to install glass to metal or timber doors, windows and other frames. It includes residential glazing and reglazing confined to simple windows such as fixed, sliding, casement, awning and double hung or louvres and doors such as sliding, hinged, pivot and bi-fold. Work may involve removal and installation of designed glass panels.This unit applies to glaziers working in accordance with pre-determine work orders.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Identify work requirements
  • 1.1 Identify requirements for glass type and fixing method from review of documentation and communication with the customer
  • 1.2 Identify and follow work health and safety requirements
  • 1.3 Plan a logical work sequence suited to the job and workplace procedures
2. Prepare for work
  • 2.1 Take accurate site measurements and establish clearance and wedge requirements
  • 2.2 Select glass and frames, and check for type, size and imperfections against job requirements
  • 2.3 Select glass type and fixing method in accordance with Australian Standards and advise customer if requirements impact on glass ordered
  • 2.4 Select and check tools and equipment for suitability, serviceability and safety prior to use
  • 2.5 Prepare fixing and sealing materials by mixing or cutting to length, in accordance with job requirements
3. Identify site conditions and constraints
  • 3.1 Recognise on-site hazards and constraints and take corrective action in accordance with regulations and workplace requirements
  • 3.2 Apply covering material to protect existing fixtures and fittings in accordance with workplace procedures
  • 3.3 Identify characteristics of the window or door which may affect the finished job and take corrective action
4. Perform glazing
  • 4.1 Safely remove and dispose of glass from existing frame in accordance with workplace procedures
  • 4.2 Prepare frame to receive glass through check of size against specifications, removal of sealant remains, and surface preparation
  • 4.3 Cut glass to size in accordance with work requirements
  • 4.4 Fix glass to the frame using the selected method and in accordance with established industry procedures and Australian Standards
  • 4.5 Use solvents and sealants in accordance with manufacturer recommendations and Australian Standards
  • 4.6 Remove excess sealing material and clean glass and frame with suitable cleaning agents after fixing
5. Complete work
  • 5.1 Check completed installation for compliance with specifications and rectify any deficiencies
  • 5.2 Clean and store tools, equipment and materials in accordance with workplace procedures
  • 5.3 Clean work area and leave in a safe condition, and dispose of or recycle waste in accordance with workplace protocols
  • 5.4 Accurately complete required workplace documentation
No information
No information
Replaces
State Code National Code Title Type
WI480 MSFGG2008 Glaze and re-glaze residential windows and doors Unit of competency