Qualification Outline
22/07/2026 5:24 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Timber Manufactured Products
Certificate II in Timber Manufactured Products
FWP20516
BAM4
Replaced
Replaced
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 4.00 | 12/02/2021 | Current | Approved |
| 3.00 | 04/12/2020 | Replaced | Approved |
| 2.00 | 31/01/2020 | Replaced | Approved |
| 1.00 | 13/05/2016 | Replaced | Approved |
Description
This qualification is designed for job roles in the timber manufactured products sector of the forest and wood products industry.
Job roles
This qualification has six employment pathways for operational environments in the forest and forest products industry. These are:
Grader
Manufacturing Assistant (Timber Products)
Saw Operator
Timber Manufacturing Worker
Timber Products Worker
Timber Puller
Licensing, legislative, regulatory, or certification requirements may apply to units in this qualification in some states and territories at the time of publication and may differ according to jurisdiction.
Some imported units in the elective bank may be subject to licensing, legislative, regulatory, or certification requirements. These units must be implemented in line with the licensing requirements outlined in the units parent Training Package.
Schedule
Packaging Rules
To achieve this qualification, competency must be demonstrated in:- Thirteen (13) units of competency:
- five (5) core units plus
- eight (8) elective units.
Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:
- three (3) units from Group A
- five (5) units from Group A and/or Group B, the total of which can include up to two (2) units recommended for packaging at Certificate I, II or III level from this or any other endorsed Training Package or state/territory accredited course.
Elective units must be relevant to work undertaken in the timber manufactured products sector of the industry.
Elective Units
An asterisk (*) next to the unit code on TGA indicates that there are prerequisite requirements which must be met when packaging the qualification. Please refer to the Prerequisite requirements table for details.
1. Core Units
All five (5) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| AXM11 | FWPCOR2202 | Communicate and interact effectively in the workplace | 20 | Unit of competency |
| AXM10 | FWPCOR2203 | Follow environmental care procedures | 20 | Unit of competency |
| AXM07 | FWPCOR2205 | Follow WHS policies and procedures | 20 | Unit of competency |
| AXM06 | FWPCOR2207 | Maintain quality and product care | 20 | Unit of competency |
| AXM09 | FWPCOR2201 | Work effectively in the forest and forest products industry | 20 | Unit of competency |
2. Group A Elective Units
At least three (3) units must be chosen.
Please refer to the packaging rules for the full details of available options.
3. Group B Elective Units
Up to five (5) units may be chosen.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| J462 | FPI20511 | Certificate II in Timber Manufactured Products | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BJC2 | FWP20322 | Certificate II in Timber and Wood Products Operations | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships