Unit of competency Outline

Date retreived
23/07/2026 3:36 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Machine material

Machine material

Unit of competency
National Code
FWPTMM2204
State Code
OBM06
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
29/05/2020
Nominal Hours
20
Description
This unit of competency describes the skills and knowledge required to set up and operate basic static machines used for sawing, planing, sanding and drilling. This includes identifying requirements in a work order, following workplace health and safety procedures, planning machining processes, setting up and operating static machines and performing routine machine maintenance.The unit applies to individuals who operate basic static machines in a timber processing or manufacturing facility.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for machining
  • 1.1 Review work order and check with appropriate personnel
  • 1.2 Review workplace health and safety procedures, including the use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with machining material
  • 1.4 Identify workplace environmental protection procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
  • 1.5 Obtain type and quantity of material to be machined from storage location
  • 1.6 Select appropriate equipment, and check for operational effectiveness according to manufacturer recommendations
  • 1.7 Plan material machining process according to work order
2. Set up machines
  • 2.1 Check safety equipment, including emergency stops, gauges, guards and controls
  • 2.2 Complete machine settings and adjustments according to job requirements and manufacturer instructions
  • 2.3 Complete trial runs to check machine operation and accuracy and quality of finished work
  • 2.4 Accept or reject trialled material, and reuse, recycle or dispose of according to workplace and environmental protection practices
  • 2.5 Adjust machine setting as necessary
3. Operate machines
  • 3.1 Complete equipment pre-start-up checks according to workplace procedures
  • 3.2 Operate machine according to manufacturer instructions, safe operating procedures and environmental protection practices
  • 3.3 Monitor machine operation to ensure product quality and output
  • 3.4 Repair sub-quality items to minimise waste, and recycle or discard others according to workplace and environmental protection practices
  • 3.5 Stack material safely in designated location according to work order requirements
4. Complete operator maintenance
  • 4.1 Follow workplace safety procedures to lock out equipment
  • 4.2 Keep machine area clear of dust, off-cuts and debris according to safety and site requirements
  • 4.3 Inspect saw blade, knife, drill or sanding belt condition according to workplace and manufacturer guidelines
  • 4.4 Inform appropriate personnel of need to replace saw blade, knife, drill or sanding belt according to workplace and manufacturer procedures
  • 4.5 Record and report machining outcomes, equipment faults and maintenance requirements to appropriate personnel
No information
No information
Replaces
State Code National Code Title Type
AXJ71 FWPTMM2202 Machine material Unit of competency