Unit of competency Outline

Date retreived
22/07/2026 3:20 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Machine material

Machine material

Unit of competency
National Code
FWPTMM2202
State Code
AXJ71
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
20
Description
This unit of competency describes the outcomes required to operate basic static machines used for sawing, planing, sanding and drilling and complete non-specialist maintenance. Work is completed in a forest and wood products factory setting.The unit applies to job roles including saw operator, timber manufacturing worker, timber products worker, customer service/sales assistant (timber merchandising), woodmachinist.No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for machining
  • 1.1 Review work order and check with appropriate personnel.
  • 1.2 Obtain type and quantity of material to be machined from storage location.
  • 1.3 Select appropriate equipment and check for operational effectiveness in line with manufacturer's recommendations.
  • 1.4 Plan material machining process in line with work order.
2. Set up machines
  • 2.1 Check safety equipment, including emergency stops, gauges, guards and controls.
  • 2.2 Complete machine settings and adjustments in line with job requirements and manufacturer's instructions.
  • 2.3 Complete trial runs to check machine operation, accuracy and quality of finished work.
  • 2.4 Accept or reject trialled material and dispose of in line with environmental protection practices.
  • 2.5 Adjust machine setting as necessary.
3. Operate machines
  • 3.1 Complete equipment pre start-up checks in line with organisational procedures.
  • 3.2 Operate machine in line with manufacturer's instructions, safe operating procedures and environmental protection practices.
  • 3.3 Monitor machine operation to ensure product quality and output.
  • 3.4 Repair sub-quality items to minimise waste and recycle or discard others in line with environmental protection practices.
  • 3.5 Stack material safely in designated location in line with work order requirements.
4. Complete operator maintenance
  • 4.1 Follow organisational safety procedures to lock-out equipment.
  • 4.2 Remove and replace fixed cutter heads in line with organisational procedures.
  • 4.3 Joint straight cutters in line with organisational procedures.
  • 4.4 Record and report machining outcomes, equipment faults and maintenance requirements to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6091 FPITMM2202B Machine material Unit of competency
Replaced By
State Code National Code Title Type
OBM06 FWPTMM2204 Machine material Unit of competency