Unit of competency Outline
Date retreived
22/07/2026 5:04 AM AWST
22/07/2026 5:04 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Licence to operate a forklift truck
Licence to operate a forklift truck
Unit of competency
National Code
TLILIC0003
TLILIC0003
State Code
OAE42
OAE42
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
04/01/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
04/01/2019
Nominal Hours
40
Description
This unit specifies the skills and knowledge required to operate a forklift truck safely in accordance with all relevant legislative requirements. Competence in this unit, does not in itself result in a HRWL licence to operate this plant.Forklift truck means a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other attachments that can be raised 900 mm or more above the ground, but does not include a pedestrian-operated truck or a pallet truck.A person performing this work is required to hold a forklift truck High Risk Work Licence (HRWL).This unit requires a person operating a forklift truck to:plan for the work/taskprepare for the work/taskperform work/task pack upLicensing/Regulatory InformationLegislative and regulatory requirements are applicable to this unit of competency. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth, State and Territory HRWL requirements. The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.
Notes
Elements and Performance Criteria
1 Plan work/task
- 1.1 Task requirements are identified from work orders or equivalent and confirmed with relevant people and site inspection is conducted in accordance with workplace procedures
- 1.2 Work area operating surface is assessed to determine suitability for operational use of forklift truck in accordance with workplace procedures
- 1.3 Suitability of forklift truck and attachment working load limit (WLL)is determined for the load/s and work/task requirements in accordance with manufacturer requirements and workplace procedures
- 1.4 Working area is inspected and appropriate paths for operating the forklift truck and moving and placing load/s in work area are assessed and managed in accordance with workplace procedures
- 1.5 Hazard and risk control measures are identified and reported to relevant person/s in accordance with workplace procedures
- 1.6 Traffic management plan implementation is confirmed in accordance with workplace procedures
- 1.7 Appropriate communication procedures are identified with relevant people in accordance with workplace procedures
- 1.8 All work is confirmed to ensure coverage of work/task requirements for the relevant work area is in accordance with workplace procedures
2 Prepare for work/task
- 2.1 Consultation with workplace person/s is maintained to ensure workplan is clear and consistent with site requirements in accordance with safe work procedures
- 2.2 Weather and work environmental conditions are assessed to determine any impact on forklift truck operations in accordance with manufacturer requirements and safe work procedures
- 2.3 Risk control measures for hazards identified are checked for implementation in accordance with safe work procedures
- 2.4 Forklift truck is accessed in a safe manner in accordance with manufacturer requirements and workplace procedures
- 2.5 Forklift truck logbook is checked in accordance with manufacturer, regulatory requirements and safe work procedures
- 2.6 Pre-start checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with safe work procedures and manufacturer requirements
- 2.7 Forklift truck is set up correctly with any relevant attachments as per work plan in accordance with relevant manufacturer requirements including data plate and safe work procedures
- 2.8 Operational checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures
- 2.9 Hazard and risk control measures are checked for implementation and communicated to people in the work area in accordance with safe work procedures
3 Perform work/task
- 3.1 Weight and positioning of load is assessed to ensure compliance with forklift truck data plate requirements and in accordance with safe work procedures
- 3.2 Forklift truck is operated safely in accordance with manufacturer requirements and safe work procedures
- 3.3 Loads are monitored constantly when lifting, moving, lowering and placing to ensure stability of load and avoidance of hazards in accordance with safe work procedures
- 3.4 Unplanned and unsafe situations are responded to in accordance with safe work procedures
- 3.5 Loads are picked up, transported and placed using all forklift truck movements in accordance with safe work procedures
- 3.6 Forklift truck is parked, switched off and isolated appropriately in accordance with manufacturer requirements and safe work procedures
4 Pack Up
- 4.1 Forklift truck shutdown procedures are carried out in accordance with manufacturer requirements and safe work procedures
- 4.2 Forklift truck is secured to prevent unauthorised access/use in accordance with safe work procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWL73 | TLILIC2001 | Licence to operate a forklift truck | Unit of competency |