Qualification Outline
22/07/2026 6:24 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Certificate II in Drilling Operations
Certificate II in Drilling Operations
RII20915
AZE4
Replaced
Transition (Replaced)
National Endorsed, State Implementation and Classification
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 2.00 | 11/12/2018 | Current | Approved |
| 1.00 | 14/12/2015 | Replaced | Approved |
Description
This qualification reflects the role of employees such as drillers’ assistants who undertake a prescribed range of functions involving known routines and procedures and who take some responsibility for the quality of work outcomes.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the qualification.
Schedule
Packaging Rules
Total number of units = twelve (12)- eight (8) core units plus
- four (4) elective units, of which:
- at least one (1) must be chosen from the Group A
- no more than three (3) may be chosen from Group B
- no more than one (1) may be chosen from within this training package, or from another endorsed training package, or from an accredited course.
All elective units selected from outside this qualification must reflect current occupational and learning outcomes of this AQF qualification level.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
1. Core Units
All eight (8) units must be completed.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WH099 | RIICOM201D | Communicate in the workplace | 20 | Unit of competency |
| WH644 | RIIRIS201D | Conduct local risk control | 20 | Unit of competency |
| WH256 | RIIENV201D | Identify and assess environmental and heritage concerns | 20 | Unit of competency |
| WH456 | RIINHB201D | Load, secure and unload drilling equipment and materials | 40 | Unit of competency |
| WH457 | RIINHB202D | Set up/pack up drill site | 40 | Unit of competency |
| WH458 | RIINHB203D | Support drilling process | 96 | Unit of competency |
| AUH64 | BSBWOR203 | Work effectively with others | 20 | Unit of competency |
| WH750 | RIIWHS201D | Work safely and follow WHS policies and procedures | 30 | Unit of competency |
2. Group A Elective Units
At least one (1) unit must be completed.
Please refer to the packaging rules for the full details of available options.
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WH465 | RIINHB213D | Assist cable tool drilling | 20 | Unit of competency |
| AWB75 | RIINHB205E | Assist continuous flight auger drilling | 35 | Unit of competency |
| WH461 | RIINHB208D | Assist diamond core drilling | 20 | Unit of competency |
| WH468 | RIINHB218D | Assist grouting or cementing operations | 20 | Unit of competency |
| WH462 | RIINHB209D | Assist guided boring | 20 | Unit of competency |
| WH467 | RIINHB217D | Assist horizontal direction drilling | 30 | Unit of competency |
| AWB77 | RIINHB206E | Assist large diameter auger drilling | 35 | Unit of competency |
| WH464 | RIINHB211D | Assist mud rotary drilling | 20 | Unit of competency |
| WH463 | RIINHB210D | Assist surface directional drilling | 20 | Unit of competency |
| WH466 | RIINHB216D | Assist underground in-seam directional drilling | 30 | Unit of competency |
| WH469 | RIINHB219D | Assist with air drilling | 30 | Unit of competency |
3. Group B Elective Units
No more than three (3) units may be completed.
Please refer to the packaging rules for the full details of available options.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| J685 | RII20913 | Certificate II in Drilling Operations | Qualification |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFH0 | RII20920 | Certificate II in Drilling Operations | Qualification |
No information
Entry Requirements
There are no entry requirements for this qualification.
Traineeships and Apprenticeships