Unit of competency Outline

Date retreived
23/07/2026 7:01 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist underground in-seam directional drilling

Assist underground in-seam directional drilling

Unit of competency
National Code
RIINHB216D
State Code
WH466
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
28/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
28/05/2014
Nominal Hours
30
Description
This unit describes a participant’s skills and knowledge required to assist underground in-seam directional drilling in Coal mining and Drilling.This unit is appropriate for those working in drillers assistant roles.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for assisting underground in-seam directional drilling
  • 1.1 Access, interpret and apply assist underground in-seam directional drilling documentation, and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Communicate and coordinate activities with others throughout the work activity
  • 1.6 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
  • 1.7 Load, unload and move tools and equipment
2. Support the underground in-seam directional drilling process
  • 2.1 Position and number drill rods in readiness for drilling
  • 2.2 Inspect in-hole drilling components for damage
  • 2.3 Fit and remove in-hole drilling components to and from the drill string
  • 2.4 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • 2.5 Prepare for unplanned gas and water leakage
3. Carry out basic maintenance of tools and equipment
  • 3.1 Monitor the drill rods for wear and damage and dress and grease threads
  • 3.2 Rotate rods in stack as and when required
  • 3.3 Perform inspections and routine checks on hoses and ancillary equipment and carryout remedial action
  • 3.4 Ensure that drill fluids are appropriately contained and disposed
  • 3.5 Complete housekeeping activities
  • 3.6 Process records
No information
No information
Replaces
State Code National Code Title Type
WB680 RIINHB216A Assist underground in-seam directional drilling Unit of competency
Replaced By
State Code National Code Title Type
OBW35 RIINHB216E Assist underground in-seam directional drilling Unit of competency
State Code National Code Title Type
AZE4 RII20915 Certificate II in Drilling Operations Qualification
J685 RII20913 Certificate II in Drilling Operations Qualification