Unit of competency Outline

Date retreived
22/07/2026 10:46 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist surface directional drilling

Assist surface directional drilling

Unit of competency
National Code
RIINHB210D
State Code
WH463
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030303 - Mining Engineering
Original Release Date
29/05/2014
Nominal Hours
20
Description
This unit describes a participant’s skills and knowledge required to assist surface directional drilling in Coal mining and Drilling. This unit is appropriate for those working in driller assistants roles.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare for assisting with surface directional drilling
  • 1.1 Access, interpret and apply surface directional drilling documentation, and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for the work activity
  • 1.5 Communicate and coordinate activities with others throughout the work activity
  • 1.6 Load, unload and move tools and equipment
  • 1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Support the surface directional drilling process
  • 2.1 Position and number drill rods in readiness for drilling
  • 2.2 Inspect in-hole drilling components for damage
  • 2.3 Fit and remove in-hole drilling components to and from the drill string
  • 2.4 Continually monitor hazards and risks, and ensure safety of self, other personnel, plant and equipment
  • 2.5 Monitor operation for unplanned gas and water leakage and other environmental hazards
3. Carry out basic maintenance of tools and equipment
  • 3.1 Monitor the drill rods for wear and damage, dress and grease threads
  • 3.2 Rotate rods and replace as and when required
  • 3.3 Perform inspections and routine checks on hoses and ancillary equipment and carryout remedial action
  • 3.4 Ensure that drill fluids are appropriately contained and disposed
No information
No information
Replaces
State Code National Code Title Type
WC363 RIINHB210B Assist surface directional drilling Unit of competency
Replaced By
State Code National Code Title Type
OBW39 RIINHB210E Assist surface directional drilling Unit of competency