Unit of competency Outline

Date retreived
22/07/2026 7:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assist surface directional drilling

Assist surface directional drilling

Unit of competency
National Code
RIINHB210E
State Code
OBW39
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
23/09/2020
View on TGA
State Implementation and Classification
Approved Date
05/03/2021
Field of Education
030303 - Mining Engineering
Original Release Date
05/03/2021
Nominal Hours
20
Description
This unit describes the skills and knowledge required to assist surface directional drilling in coal mining and drilling. It prepares individuals to position, inspect and carry out basic maintenance of tools and equipment including drill rods, in-hole drilling components, hoses and ancillary equipment.It applies to those working in assistant driller roles. They generally work under supervision to undertake a prescribed range of functions involving known routines and procedures.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Plan and prepare to assist with surface directional drilling
  • 1.1 Obtain, read and confirm work requirements
  • 1.2 Access, interpret and apply surface directional drilling documentation, and confirm work activity is compliant
  • 1.3 Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures
  • 1.4 Select and wear personal protective equipment required for work activities
  • 1.5 Communicate with other personnel on site as required and confirm briefings and handover details are communicated and received
  • 1.6 Load, unload and move tools and equipment according to safety and job requirements
  • 1.7 Obtain and interpret emergency procedures and identify steps in case of fire, accident and other emergencies
2. Support the surface directional drilling process
  • 2.1 Position and number drill rods in readiness for drilling
  • 2.2 Inspect in-hole drilling components for damage
  • 2.3 Fit and remove in-hole drilling components to and from the drill string
  • 2.4 Monitor hazards and risks, and confirm safety of self, other personnel, plant and equipment
  • 2.5 Monitor operation for unplanned gas and water leakage and other environmental hazards
3. Carry out basic maintenance of tools and equipment
  • 3.1 Monitor the drill rods for wear and damage, dress and grease threads
  • 3.2 Rotate rods and replace as and when required
  • 3.3 Perform inspections and routine checks on hoses and ancillary equipment and carry out remedial action
  • 3.4 Confirm that drill fluids are contained and disposed of according to workplace procedures and environmental requirements
  • 3.5 Evaluate the need for, locate and retreat to, a place of safety
  • 3.6 Build barricade/s for protection
  • 3.7 Monitor air/oxygen usage, adjust rate of travel where necessary and ensure efficient changeover of self-rescuer/breathing apparatus
4. Participate in post-incident debrief
  • 4.1 Provide details of escape to required personnel
  • 4.2 Process written records or reports according to workplace and regulatory requirements
  • 4.3 Evaluate need for voluntary counselling
No information
No information
Replaces
State Code National Code Title Type
WH463 RIINHB210D Assist surface directional drilling Unit of competency
State Code National Code Title Type
BFH0 RII20920 Certificate II in Drilling Operations Qualification